You may also like
1-1/2" EMT Set Screw Connector
Features
- Hex head screws 2 1/2" thru 4"
- Concrete tight when taped
- Pre-set and staked tri-head screws 1/2"-2"
- Heavy steel walls
Manufacturer Resources
Product Specs
- Department:
- Electrical
Allied Tube & Conduit SC150RKON – Frequently Asked Questions
1) What size EMT does the Allied Tube & Conduit SC150RKON set screw connector fit?
The SC150RKON is a 1-1/2 inch EMT set screw connector. It terminates 1-1/2 inch electrical metallic tubing into a box or enclosure; it is not a coupling, so it joins conduit to an enclosure knockout rather than tube to tube. For other trade sizes you need the matching connector, not this one.
2) Can this EMT set screw connector be used in a concrete pour?
It is concrete tight when taped. Tape the joint between the connector and the tubing before the pour so slurry cannot enter. Untaped, treat it as a dry-location fitting only, and note that set screw fittings are not raintight, so outdoor or wet-location runs call for a compression connector instead.
3) Is the SC150RKON connector a hex head or tri-head set screw?
Allied's set screw connector line uses pre-set and staked tri-head screws on the 1/2 inch through 2 inch sizes, and hex head screws on 2-1/2 inch through 4 inch. At 1-1/2 inch, the SC150RKON falls in the tri-head range. Pre-set and staked means the screw ships already started in the body and will not back out and get lost on the job.
4) Set screw or compression connector for 1-1/2 inch EMT, which should I use?
Set screw, like the SC150RKON, is the standard choice for indoor dry runs and in-slab work where the joint gets taped, and it installs faster with one screw. Compression connectors cost more and take longer but are what you specify for damp, wet, or exposed exterior locations. If the run leaves the building or sees washdown, do not use a set screw fitting.
5) What is the manufacturer part number to order this 1-1/2 inch Allied EMT connector?
Order it as Atkore Allied Tube & Conduit SC150RKON. That is the full manufacturer part number for the 1-1/2 inch EMT set screw connector, and it is the number to quote on a distributor order so you do not get sent the compression version.
6) Is the SC150RKON connector steel or die cast?
It is built with heavy steel walls, not die cast zinc. That matters on 1-1/2 inch runs where the fitting takes the weight and leverage of a larger raceway, and in slab work where the body has to survive the pour.
How fast can I get the Allied Tube & Conduit SC150RKON delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Allied Tube & Conduit SC150RKON come with a warranty?
Absolutely. The Allied Tube & Conduit SC150RKON is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Allied Tube & Conduit SC150RKON?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Allied Tube & Conduit SC150RKON from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.