You may also like
1-1/2" Roof Jack 26ga 2-Piece
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
Metallics MF150 – Frequently Asked Questions
1) What pipe size does the Metallics MF150 roof jack fit?
The MF150 roof jack is sized for 1-1/2 inch pipe. Order it to match the outside diameter class of the vent or conduit penetrating the roof deck, not the fitting above it, since the jack sleeve has to slip over that run.
2) Why is the Metallics MF150 roof jack a 2-piece design instead of one piece?
Two pieces means the base flashing and the cap or storm collar install separately, so the sleeve can be set over the pipe and the upper piece dropped on afterward to shed water at the joint. That matters on a retrofit where the pipe is already through the deck and you cannot thread a one-piece jack down over a fitting.
3) Is 26 gauge heavy enough for a roof jack on a commercial reroof?
The MF150 is formed from 26 gauge sheet, which is the common light-commercial and residential weight for vent flashings and roof jacks. It is intended to be bedded in sealant and fastened under shingle or panel courses rather than to carry foot traffic. If the spec on the drawing calls out a heavier gauge or a soldered copper or stainless flashing, this is not the part for that detail.
4) What is the exact manufacturer part number for the Metallics 1-1/2 inch roof jack?
Metallics part number MF150. That single number covers the 1-1/2 inch, 26 gauge, 2-piece roof jack, so there is no finish or length suffix to add when ordering.
How fast can I get the Metallics MF150 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics MF150 come with a warranty?
Absolutely. The Metallics MF150 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics MF150?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics MF150 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.