Thomas & Betts WMG-PC15 1-1/2IN WIREMESH GRIP SST 1.25-1.37

The WMG-PC15 is sized for cable in the 1.25 to 1.37 inch outside diameter range, and it's built around a 1-1/2 inch trade size. Measure the actual OD of the jacketed cable you're pulling or supporting before you order. If your cable measures under 1.25 inches or over 1.37 inches, the mesh won't grip properly and you need the adjacent size in the series instead.

Stainless steel. That's the construction material on the WMG-PC15, which is what you want where the grip sits in a damp, washdown, coastal, or chemically aggressive location and a plated carbon steel mesh would rust out.

A wire mesh grip is a woven metal sleeve that slides over a cable and tightens its hold as tension increases, so it can either pull the cable through a conduit run or support its weight at a vertical drop or a box entry. The Thomas & Betts WMG-PC15 is the stainless steel version for cable measuring 1.25 to 1.37 inches OD.

Call out Thomas & Betts WMG-PC15. That's the manufacturer part number for the 1-1/2 inch stainless steel wire mesh grip covering 1.25 to 1.37 inch cable. The trailing digits in the T&B WMG series track the size, so confirm the cable OD rather than assuming the conduit trade size matches.