You may also like
1/2IN WIREMESH GRIP SST
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Type:
- Support Grip
- Department:
- Electrical
- Product Material:
- Stainless Steel
- Product Group:
- Hangers, Supports & Fasteners
- Product Subgroup:
- Cable Support Systems
Thomas & Betts WMG-PC1 – Frequently Asked Questions
1) What is the Thomas & Betts WMG-PC1 wire mesh grip made of, and can it be used outdoors or in wet locations?
The WMG-PC1 is a stainless steel wire mesh grip. Stainless construction is what makes it suitable where a plated steel grip would corrode, so outdoor runs, damp basements, wash-down areas and coastal sites are all in scope for the material. It is a mechanical support device only, with no electrical or battery components involved.
2) What size cable or conduit does the Thomas & Betts WMG-PC1 grip take?
The WMG-PC1 is the 1/2 inch size in the Thomas & Betts wire mesh grip line. That is the figure to match against the outside diameter of the cable or flexible conduit you are supporting, not the trade size of a raceway it happens to run beside.
3) What is a wire mesh grip used for on an electrical job?
A wire mesh grip is a woven metal sleeve that slides over a cable and tightens its hold as tension increases, so the pull or the hanging weight is carried by the grip rather than by the conductors and terminations. Electricians use them to pull cable into conduit and to support vertical cable runs. The Thomas & Betts WMG-PC1 is the stainless steel version in the 1/2 inch size.
4) What part number do I order for the 1/2 inch stainless Thomas & Betts wire mesh grip?
Order by manufacturer part number WMG-PC1. That is the single model covered, so there is no finish, length or material option to specify alongside it, and the material is stainless steel throughout.
How fast can I get the Thomas & Betts WMG-PC1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts WMG-PC1 come with a warranty?
Absolutely. The Thomas & Betts WMG-PC1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts WMG-PC1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts WMG-PC1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.