You may also like
1IN WIREMESH GRIP SST 1.00-1.125
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Type:
- Support Grip
- Department:
- Electrical
- Product Material:
- Stainless Steel
- Product Group:
- Hangers, Supports & Fasteners
- Product Subgroup:
- Cable Support Systems
Thomas & Betts WMG-PC12 – Frequently Asked Questions
1) What cable diameter does the Thomas & Betts WMG-PC12 wire mesh grip fit?
The WMG-PC12 is sized for cable in the 1.00 to 1.125 inch outside diameter range, which is what the 1IN designation refers to. Mesh grips only hold properly when the cable OD falls inside the stated range, so measure the actual jacket diameter rather than going by conductor size. Cable under 1.00 inch or over 1.125 inch needs a different size grip.
2) Is the WMG-PC12 wire mesh grip stainless steel or galvanized?
Stainless steel. That matters if the grip is going into a wet, washdown, coastal, or chemically aggressive location where a plain steel or galvanized mesh would rust out and lose grip strength on the cable.
3) What is a wire mesh grip used for on an electrical job?
A wire mesh grip is a woven metal sleeve that slides over a cable and tightens on it under tension, so the pull or the hanging weight is carried by the cable jacket over a long length instead of by the terminations. Electricians use them for pulling cable through conduit and raceway and for supporting vertical cable runs. The Thomas & Betts WMG-PC12 is the version for cable measuring 1.00 to 1.125 inches in diameter.
4) What part number do I order for a 1 inch stainless wire mesh grip from Thomas & Betts?
WMG-PC12 is the Thomas & Betts manufacturer part number for the 1 inch stainless steel mesh grip covering 1.00 to 1.125 inch cable. Order by that number, since the mesh grip line is broken out into narrow diameter bands and adjacent part numbers look nearly identical on a packing slip.
How fast can I get the Thomas & Betts WMG-PC12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts WMG-PC12 come with a warranty?
Absolutely. The Thomas & Betts WMG-PC12 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts WMG-PC12?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts WMG-PC12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.