You may also like
1-1/4" Compression Connectors With Insulated Throat
Features
- Heavy steel walls
- Rated for concrete usage
- Zinc plated to avoid corrosion
Manufacturer Resources
Product Specs
- Department:
- Electrical
Allied Tube & Conduit CC125-ICRKON – Frequently Asked Questions
1) Is the Allied Tube & Conduit CC125-ICRKON connector for EMT or for rigid conduit?
It's a compression connector sized for 1-1/4 inch EMT, terminating the tubing into a box or enclosure. Compression (gland nut) style means no set screws, so it grips the tube wall as the nut is tightened. For threaded rigid or IMC you would use a threaded hub or coupling instead, not this fitting.
2) Can I use this 1-1/4 inch compression connector in a concrete pour?
Yes. The CC125-ICRKON is rated for concrete usage and has heavy steel walls, so it holds up to being encased. Zinc plating is there for corrosion resistance in that kind of service.
3) Do I still need a plastic bushing when pulling conductors through this connector?
No. The insulated throat is built into the connector, so the wire bears on a smooth insulating surface as it enters the box. That's the point of the ICR designation on CC125-ICRKON, and it's what many jurisdictions and specs call for on feeder-size conductors.
4) What part number should I give my supplier for the 1-1/4 inch Allied insulated-throat compression connector?
Order it as Atkore Allied Tube & Conduit CC125-ICRKON. That's the manufacturer part number for the 1-1/4 inch compression connector with insulated throat; the CC125 prefix is the size and style, ICR the insulated throat.
5) Will this connector work for a wet or outdoor location run?
The steel body is zinc plated for corrosion resistance, which is what you want on damp or concrete-encased work. Compression style also seals better against moisture at the tube than a set-screw fitting, which is why compression is the usual choice outdoors and set-screw is kept to dry interior runs.
6) Does the CC125-ICRKON come with a locknut for the box side?
The KON suffix on this Allied fitting denotes the connector supplied with its nut for the enclosure side, so you are not sourcing the locknut separately. You will still need to provide the 1-1/4 inch knockout or punch it to size in the box.
How fast can I get the Allied Tube & Conduit CC125-ICRKON delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Allied Tube & Conduit CC125-ICRKON come with a warranty?
Absolutely. The Allied Tube & Conduit CC125-ICRKON is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Allied Tube & Conduit CC125-ICRKON?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Allied Tube & Conduit CC125-ICRKON from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.