You may also like
Thomas & Betts 1-1/4 Inch Pop-On Insulated Bushing - High Impact Thermoplastic Construction
Model: TB-TRIB
Thomas & Betts 1-1/2 Inch Pop-On Insulated BushingProfessional Conduit Protection & Insulation SolutionThe Thomas & Betts 1-1/2 inch pop-on insulated bushing delivers reliable conduit protection with...
Thomas & Betts
Starting at
$17.21
1 1/4 INCH INSUL. LIQ.TIGHT CONN ST
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Group:
- Conduit & Raceway
- Product Type:
- Straight Liquidtight Connector
- Department:
- Electrical
- Product Subgroup:
- Liquidtight Conduit & Fittings
- Product Material:
- Steel
- Product Size:
- 1-1/4 Inch
- Weee Category:
- Product Not in WEEE Scope
Thomas & Betts 5335 – Frequently Asked Questions
1) What size liquidtight conduit does the Thomas & Betts 5335 connector fit?
The T&B 5335 is a 1-1/4 inch straight liquidtight connector, so it terminates 1-1/4 inch flexible metal liquidtight conduit and threads into a 1-1/4 inch knockout or hub.
2) I need a watertight termination for 3/4 inch jacketed MC cable, not conduit. What should I order instead of the 5335?
Look at the Bridgeport Fittings 597-DC2, a Mighty-Seal connector built for 3/4 inch PVC-jacketed MC/TECK cable with a zinc body. The Thomas & Betts 5335 is a straight liquidtight connector made to terminate 1-1/4 inch liquidtight flexible conduit in steel, so it is the wrong fitting for a jacketed cable run and the wrong trade size for a 3/4 inch opening.
3) Can a Bridgeport Mighty-Seal 597-DC2 connector be used in place of the Thomas & Betts 5335?
No, they terminate different wiring methods. The Thomas & Betts 5335 is a straight liquidtight connector sized for 1-1/4 inch liquidtight flexible conduit, with a steel body and an insulated throat. The Bridgeport 597-DC2 is a Mighty-Seal connector for 3/4 inch PVC-jacketed MC/TECK cable in a zinc body, so it clamps a jacketed cable rather than the convoluted core of liquidtight flexible metal conduit. If the raceway on the job is 1-1/4 inch liquidtight conduit, the 5335 is the correct termination.
4) What does the "insulated" mean on the Thomas & Betts 5335 connector?
It means the throat is lined so conductors pulled through the connector are not dragged across bare metal thread ends. That matters where the wire is pulled under tension or where the install needs a smooth, burr-free throat without adding a separate bushing.
5) Is the 5335 liquidtight connector steel or zinc die cast?
Steel. That is the body material on the 1-1/4 inch 5335, which is worth noting if your spec calls out steel fittings rather than die cast for the raceway system.
How fast can I get the Thomas & Betts 5335 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts 5335 come with a warranty?
Absolutely. The Thomas & Betts 5335 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts 5335?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts 5335 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.