You may also like
1/2 IN RIGID INSUL COMPRESSION CONN
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Group:
- Conduit & Raceway
- Product Type:
- Conduit Connector
- Department:
- Electrical
- Product Subgroup:
- Conduit Fittings
- Product Material:
- Malleable Iron
- Pack size (unit):
- 100
Thomas & Betts 8123 – Frequently Asked Questions
1) Will the 8123 work with EMT?
It is specified for rigid conduit at 1/2 inch trade size. EMT has a different outside diameter at the same trade size, so use an EMT compression connector for thinwall. Mixing the two will not give you a proper ferrule bite.
2) Is the Thomas & Betts 8123 insulated, and does that mean I can skip a bushing on a wire pull?
Yes, the 8123 is an insulated connector, so it has an insulating throat liner built into the box-side opening to protect conductor insulation as wire is pulled. That is the reason to spec the insulated version over a plain compression connector.
3) Do I need to thread the conduit to use the 8123 connector?
No. It is a compression fitting, so the conduit goes in unthreaded and the gland nut squeezes a ferrule onto the pipe. That is why electricians reach for it on retrofit work where cutting new threads on an installed rigid run is impractical.
4) What is the Thomas & Betts 8123 connector body made of?
Malleable iron. That gives it more impact and crush resistance than a die-cast zinc fitting, which is why it shows up on exposed industrial rigid runs rather than concealed residential work.
5) How many Thomas & Betts 8123 connectors come in a pack?
They ship 100 to a pack, which is how this fitting is normally bought for a panel or feeder job rather than piece by piece. Order quantity is in packs of 100, so plan your count accordingly.
How fast can I get the Thomas & Betts 8123 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts 8123 come with a warranty?
Absolutely. The Thomas & Betts 8123 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts 8123?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts 8123 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.