You may also like
1 INCH, 2G-DEEP BOX, IRON, D-END
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Group:
- Electrical Boxes
- Product Type:
- 2 Gang, Deep Device Box, Dead End
- Department:
- Electrical
- Product Subgroup:
- Electrical Boxes
- Product Material:
- Iron
Thomas & Betts FD32-TB – Frequently Asked Questions
1) Is the FD32-TB a two gang box, and how many devices will it hold?
Two gang. The FD32-TB is a deep two gang device box, so it takes two devices side by side, a duplex plus a switch, a two gang cover, or a single device with a blank half.
2) What does dead end mean on the FD32-TB box?
Dead end means the box has hubs on one end only, so conduit enters from a single side and the run terminates there. If you need the conduit to pass through and continue, use a through feed FD body instead of the dead end version.
3) Can the FD32-TB be used outdoors or in a wet location?
FD bodies like the FD32-TB are threaded, gasketed cast boxes built for damp and wet locations when paired with the correct gasketed FD cover and a gasket. The box alone does not make the location rating, the cover and gasket complete it, so order the cover with it.
4) Is the Thomas & Betts FD32-TB metal or plastic?
Iron. It is a cast iron body, not a stamped steel or PVC box, which is why it accepts threaded conduit directly and holds up in industrial and exterior work where a plastic box would not.
5) Do I get a cover with the FD32-TB, or is that separate?
The FD32-TB is the box body only. Plan on ordering a two gang FD cover, duplex, switch, GFCI or blank as the application needs, plus its gasket, and the device itself. Nothing is packed with the body.
6) Why choose a deep FD box instead of a standard FS box?
Depth. FD bodies are the deep version of the FS shallow body, giving more wiring volume behind the device for deeper devices, GFCIs, or several conductors landing in the same box. Same footprint and same covers, more room inside. If the device is shallow and conductor count is low, the FS body does the job in less space.
7) What is the manufacturer part number for the 1 inch two gang dead end FD box from Thomas & Betts?
FD32-TB. That is the Thomas & Betts catalogue number for the iron, two gang, deep, dead end FD body with 1 inch hubs.
How fast can I get the Thomas & Betts FD32-TB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts FD32-TB come with a warranty?
Absolutely. The Thomas & Betts FD32-TB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts FD32-TB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts FD32-TB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.