Metallics JRM95 10-24 x 1-1/2 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.19
$0.19
Metallics JRM95 10-24 x 1-1/2 in. Round Head Combo Machine Screws - Steel Zinc - 100qty

Metallics JRM95 10-24 x 1-1/2 in. Round Head Combo Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM95
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.19
$0.19
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 1-1/2 in. Round Head Combo Machine Screws - Steel Zinc - 100qty

  • Features

    • Two Drives in one Head
    • Round head with slotted and Phillips Drive
    • 10-24 Diameter, 1-1/2" Length
    • Steel Zinc Material

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Drive Type:
Slotted/Phillips
Driver Size:
#2
Fastener Head Height:
0.123 - 0.137 in.
Fastener Head Type:
Round
Fastener Head Width:
0.334 - 0.359 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.093 - 0.119
Phillips Recess Diameter:
0.182 - 0.195
Phillips Recess Width:
0.031
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.12 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.082 - 0.108
Slot Depth:
0.065 - 0.087
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
24
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM95 – Frequently Asked Questions

1) Can I drive these with a Phillips bit, or do I need a flat blade?
Either. The head is a combo drive, slotted and Phillips in one head, so a #2 Phillips bit or a flat blade both work. That is useful on a service call where you are reaching into a box one handed and only have one driver on the belt.
2) Do these Metallics screws meet Buy American or ARRA requirements for a public project?
No. The JRM95 is not Buy American compliant and not ARRA compliant, with country of origin listed as multiple. On a federally funded job with domestic sourcing language in the spec, you will need a domestically produced fastener instead.
3) How much does the round head stand up off the surface?
Head height runs 0.123 to 0.137 in. with a head width of 0.334 to 0.359 in. A round head sits proud of the surface rather than pulling flush, so if you need the fastener flush in a countersunk hole, choose a flat head machine screw instead of the JRM95.
4) Are these strong enough for structural or load-carrying use?
Tensile strength is 60,000 psi minimum with hardness of Rockwell B70-B100, made from AISI 1006-1022 steel. That is a general-purpose low-carbon machine screw intended for electrical, plumbing, and HVAC work, not a graded structural bolt. For load-bearing connections specify a graded hex cap screw instead.
5) Will zinc-plated steel screws hold up outdoors or in a damp location?
Zinc plating over steel is a mild corrosion barrier suited to dry interior work. For wet locations, exterior boxes, or coastal and wash-down environments, go with a stainless machine screw in the same 10-24 x 1-1/2 size rather than the zinc-plated JRM95.
6) How are the JRM95 screws packaged and what is the smallest quantity I can buy?
They ship in a jar of 100, which is the order minimum. The filled jar weighs 1.12 lbs. Handy for a van stock or a shop drawer rather than a loose handful at the counter.
7) Is a machine screw the right choice, or should I be using a sheet metal screw?
A machine screw like the JRM95 has a straight, uniform 24 TPI machine thread meant to turn into a pre-tapped hole or a nut, which is why it suits tapped box ears and threaded brackets. If you are fastening into unthreaded sheet metal with no tapped hole, use a self-tapping sheet metal screw instead.
8) Will a #2 Phillips bit cam out of these heads?
The Phillips recess is specified at 0.182 to 0.195 in. diameter with a 0.093 to 0.119 in. depth and gaging depth of 0.082 to 0.108 in., which is matched to a #2 driver. Using a #1 or #3 bit is what strips a combo head, so stay with the #2. The slot side measures 0.05 to 0.06 in. wide by 0.065 to 0.087 in. deep if you prefer a flat blade.
9) I need 10-24 combo screws in a different length. Does Metallics make other sizes in the JRM series?
Yes, the JRM series covers other sizes and quantities by request beyond the JRM95's 10-24 x 1-1/2 in. If you are standardizing a stockroom on one drive style, the combo head carries across the line.
How fast can I get the Metallics JRM95 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM95 come with a warranty?
Absolutely. The Metallics JRM95 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM95?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM95 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!