Metallics JRM114 10-32 x 2-1/2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.26
$0.26
Metallics JRM114 10-32 x 2-1/2 in. Round Head Combo Machine Screws - Steel Zinc - 100qty

Metallics JRM114 10-32 x 2-1/2 in. Round Head Combo Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM114
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.26
$0.26
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 2-1/2 in. Round Head Combo Machine Screws - Steel Zinc - 100qty

  • Features

    • Round head with slotted and Phillips Drive
    • 10-32 Diameter, 2-1/2" Length
    • Two Drives in one Head
    • Steel Zinc Material

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Drive Type:
Slotted/Phillips
Driver Size:
#2
Fastener Head Height:
0.123 - 0.137 in.
Fastener Head Type:
Round
Fastener Head Width:
0.334 - 0.359 in.
Fastener Length:
2/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.093 - 0.119
Phillips Recess Diameter:
0.182 - 0.195
Phillips Recess Width:
0.031
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
1.79 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.082 - 0.108
Slot Depth:
0.065 - 0.087
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM114 – Frequently Asked Questions

1) Do these Metallics screws meet Buy American or ARRA requirements on a federal job?
No. The JRM114 round head combo machine screws are not Buy American compliant and are not ARRA compliant, with country of origin listed as multiple. If your project has a domestic sourcing clause, these will not satisfy it.
2) Do I need a Phillips or a flathead driver for these Metallics combo screws?
Either one. The head is a combo, slotted and Phillips in the same recess, so whatever driver is already in your pouch works. A #2 Phillips is the specified driver size. For the slot, a blade of about 0.05 to 0.06 inch thickness matches the slot width, seating to a slot depth of 0.065 to 0.087 inch.
3) Will the round head on these screws sit flush, or does it stand proud of the surface?
Round head, so it sits on top of the surface, not in it. The head measures 0.334 to 0.359 inch across and stands 0.123 to 0.137 inch above the material. That domed profile also covers an oversized or slightly misaligned hole. If you need the head buried in a countersunk hole, you want a flat head screw instead.
4) How are these Metallics 10-32 screws packaged, and what is the smallest quantity I can buy?
They ship in a jar of 100, and 100 is the order minimum. That is a shop-stock quantity rather than a loose handful, which suits a service van or an MRO crib where 10-32 round heads get pulled daily.
5) Are zinc plated steel machine screws okay for outdoor or damp locations?
These are steel with a zinc finish, which is a corrosion coating for dry interior and protected use. For exterior exposure, wet locations, or washdown areas, go with stainless rather than zinc plated steel. The plating will eventually give up where water sits on it.
6) How strong are these screws, and what steel are they made from?
Carbon steel to AISI 1006 - 1022, hardened to Rockwell B70-B100, with a minimum tensile strength of 60,000 psi. That is standard commercial machine screw strength, fine for device, fixture, and strap mounting. It is not a structural or high-tensile grade, so do not substitute it where a drawing calls for a graded bolt.
7) What trades actually use a 10-32 x 2-1/2 round head combo screw?
Metallics builds the JRM series for the electrical, plumbing, heating and air conditioning trades. In practice that means mounting devices, plates, straps, hangers, and equipment covers to tapped 10-32 holes where you need extra reach. The combo head means a plumber with a flat blade and an electrician with a #2 Phillips can both drive the same screw off the same truck.
How fast can I get the Metallics JRM114 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM114 come with a warranty?
Absolutely. The Metallics JRM114 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM114?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM114 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!