Metallics JSHC1012 10-24 x 1/2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.33
$0.33
Image coming soon

Metallics JSHC1012 10-24 x 1/2 in. Socket Head Hex Cap Screws - Alloy Steel Black - Each

(No reviews yet) Write a Review

Model: JSHC1012

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.33
$0.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 1/2 in. Socket Head Hex Cap Screws - Alloy Steel Black - 100qty

  • Features

    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)
    • Supplies greater tensile strength than equivalent sizes of Grade-5 or Grade-8 hex head cap screws while requiring less surface area or counterbore since the fastener is intenally wrenched.
    • Socket head with Hex Drive
    • 10-24 Diameter, 1/2" Length
    • Alloy Steel Black Material

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.185 - 0.19 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.303 - 0.312 in.
Fastener Length:
2-Jan
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C39
Hex Size:
May-32
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Alloy_Zinc.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.82 lbs
Product Width:
3 in
Slot Depth:
0.09
Sub Division:
Electrical-E H2
Tensile Strength:
180000 psi minimum
Thread Per Inch:
24
Thread Type:
UN
Wall Thickness:
0.065
Yield Strength:
162000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Finish:
Black
Product Details:
Cap Screw
Product Material:
Alloy Steel Black

Metallics JSHC1012 – Frequently Asked Questions

1) How does an alloy steel socket head cap screw compare to a Grade 5 or Grade 8 hex bolt the same size?
The JSHC1012 is rated 180,000 psi minimum tensile and 162,000 psi minimum yield, higher than a Grade 5 or Grade 8 hex head cap screw of the same size. It also needs less surface area or counterbore clearance because it's wrenched internally through the hex socket rather than across flats. Hardness is Rockwell C39.
2) Are these black alloy steel screws okay outdoors or in a wet location?
No. The JSHC1012 is plain alloy steel with a black finish, not a plated or stainless fastener, so it has no real corrosion protection. Keep it to dry indoor service, panels, enclosures and equipment mounting. For damp, exterior or washdown work use a stainless or hot dip galvanized fastener instead.
3) Can I use these on a federally funded job with Buy American requirements?
No. The JSHC1012 is listed as not Buy American compliant and not ARRA compliant, with country of origin shown as multiple. If your contract carries domestic-sourcing language, you'll need a documented domestic fastener instead.
4) What hex key driver does a 10-24 socket head cap screw take?
Hex drive, internally wrenched. A 10-24 socket head cap screw built to ASME B18.3 takes a 5/32 inch hex key. Because the wrenching is inside the head, you can run these in tight pockets where there's no room to swing a wrench on a hex bolt head.
5) How are these Metallics cap screws packaged, and what is the minimum order?
They ship in a jar of 100 pieces, and 100 is the order minimum, one jar. The jar runs 0.82 lbs. Handy for shops that keep a bin of 10-24 hardware on the truck rather than counting out loose screws.
6) Will a 1/2 inch long screw be long enough to develop full strength in the threads?
At 1/2 inch under the head on a #10 screw, length is well past 3 diameters, which is the point at which cap screws are subject to tensile, yield, elongation and reduction of area testing. Elongation is 10 percent minimum and reduction of area 33 percent minimum on machined specimens. Practically, allow enough thread engagement in the tapped part, roughly one diameter in steel, and keep the grip stack under 1/2 inch total.
7) What trades actually use these 10-24 socket head cap screws?
They're stocked for electrical, plumbing, heating and air conditioning work, the Metallics SHC series. Typical use is machine and equipment mounting, panel and enclosure hardware, and anywhere a 10-24 tapped hole needs a high strength screw with a head that can sit in a counterbore.
How fast can I get the Metallics JSHC1012 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC1012 come with a warranty?
Absolutely. The Metallics JSHC1012 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC1012?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC1012 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!