Metallics JSHC102 10-24 x 2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Image coming soon

Metallics JSHC102 10-24 x 2 in. Socket Head Hex Cap Screws - Alloy Steel Black - Each

(No reviews yet) Write a Review

Model: JSHC102

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 2 in. Socket Head Hex Cap Screws - Alloy Steel Black - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

  • Features

    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)
    • Socket head with Hex Drive
    • Alloy Steel Black Material
    • 10-24 Diameter, 2" Length
    • Supplies greater tensile strength than equivalent sizes of Grade-5 or Grade-8 hex head cap screws while requiring less surface area or counterbore since the fastener is intenally wrenched.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.185 - 0.19 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.303 - 0.312 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C39
Hex Size:
May-32
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Alloy_Zinc.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
1.66 lbs
Product Width:
3 in
Slot Depth:
0.09
Sub Division:
Electrical-E H2
Tensile Strength:
180000 psi minimum
Thread Per Inch:
24
Thread Type:
UN
Wall Thickness:
0.065
Yield Strength:
162000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Finish:
Black
Product Details:
Cap Screw
Product Material:
Alloy Steel Black

Metallics JSHC102 – Frequently Asked Questions

1) Is a socket head cap screw stronger than a Grade 5 or Grade 8 hex head bolt of the same size?
Yes. The alloy steel socket head cap screw is rated 180,000 psi minimum tensile and 162,000 psi minimum yield, which is above the equivalent size in Grade 5 or Grade 8 hex head cap screws, and it does it in a smaller head footprint. Hardness is Rockwell C39.
2) Will a black alloy steel cap screw hold up outdoors or in a wet location?
No, pick something else. The finish here is plain black alloy steel with no corrosion-resistant plating, so it is intended for dry indoor and enclosed work. For exposed exterior or damp locations, specify a zinc plated or stainless socket head cap screw in the same 10-24 x 2 size.
3) Is this cap screw Buy American or ARRA compliant for a public works job?
No. The JSHC102 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic sourcing clause, this screw will not satisfy it.
4) Does the JSHC102 cap screw meet a dimensional standard I can put on a submittal?
It is built to ASME B18.3-2012, the dimensional standard for socket head cap screws, so head and socket geometry match what a drawing calling out a 10-24 x 2 socket head cap screw expects.
5) How are these 10-24 x 2 socket head cap screws packaged and what is the minimum order?
They ship in a jar of 100, and 100 is the order minimum. Jar weight is 1.66 lbs. Other sizes and quantities are available by request.
6) What trades use these black socket head cap screws?
Metallics lists them for electrical, plumbing, heating and air conditioning work. Typical use is fastening equipment, brackets, and fittings where a high-strength screw has to sit in a tight counterbore rather than under a wrench.
7) Are 2 inch long cap screws tested for tensile and yield, or just the shorter ones?
At 2 inches the JSHC102 is well past 3 times its nominal 10-24 diameter, so it falls in the length range subject to tensile strength, yield strength, elongation and reduction of area testing. Elongation is 10 percent minimum and reduction of area 33 percent minimum on machined specimens.
How fast can I get the Metallics JSHC102 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC102 come with a warranty?
Absolutely. The Metallics JSHC102 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC102?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC102 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!