Metallics JRMB96 10-24 x 2 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JRMB96 10-24 x 2 in. Round Head Slotted Machine Screws - Brass - 100qty

Metallics JRMB96 10-24 x 2 in. Round Head Slotted Machine Screws - Brass - Each

(No reviews yet) Write a Review

Model: JRMB96
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 2 in. Round Head Slotted Machine Screws - Brass - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • 10-24 Diameter, 2" Length
    • Round head with slotted Drive
    • Brass Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.123 - 0.137 in.
Fastener Head Type:
Round
Fastener Head Width:
0.334 - 0.359 in.
Fastener Length:
2
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.46 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.082 - 0.108
Remarks:
The catalog UPC differ from the tarnsaction daat spreadsheet UPC
Slot Depth:
0.065 - 0.087
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Thread Per Inch:
24
Thread Standard:
ANSI/ASME B1.1
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRMB
Product Details:
Machine Screw
Product Material:
Brass

Metallics JRMB96 – Frequently Asked Questions

1) Will a 10-24 machine screw thread into a standard electrical box or device ground screw hole?
The Metallics JRMB96 is a 10-24 thread, meaning 24 threads per inch on a #10 diameter, cut to ANSI/ASME B1.1. That is the same thread used on standard 10-32 vs 10-24 tapped holes, so check which your box uses: 10-24 is the coarse pitch and will not run into a 10-32 tapped hole. Device yokes and box ground lugs are commonly 10-32, while many fixture straps and plaster rings are 10-24.
2) Do these brass machine screws meet Buy American and ARRA requirements for a public project?
Both the Buy American and ARRA compliance flags on the JRMB96 come back as compliant. Country of origin is listed as multiple, so if your specification requires documentation of a single source country, request the certificate for the lot you are supplied.
3) Will a round head screw sit flush, or do I need a flat head for a cover plate?
Round head, so it seats on the surface and the dome stands 0.123 to 0.137 inch proud with a bearing diameter of 0.334 to 0.359 inch. It will not sit flush and it is not meant to be countersunk. For a flush finish in a countersunk cover plate or wall plate, use a flat head machine screw instead; this one is for strap, bracket and box mounting where the head can stand up.
4) Why choose brass machine screws instead of steel for electrical work?
Brass is the material here, which matters in two ways on the job: it resists corrosion in damp and outdoor locations where plated steel rusts and seizes, and it is non-magnetic. It is also softer than steel, so if you are torquing hard into a steel strap, do not overdrive the slot. For high-clamp structural work, a steel or stainless screw is the better pick.
5) What driver do I need for the Metallics JRMB96 screws, and will a power driver strip them?
Slotted drive only, with a slot 0.05 to 0.06 inch wide and 0.065 to 0.087 inch deep. Use a flat blade sized to fill that slot. Slotted heads cam out easily and brass is soft, so hand drive or run a clutch driver at low torque if you are setting a hundred of them.
6) How are the JRMB96 round head brass screws packaged and what is the minimum I can buy?
They come in a jar of 100, and 100 count is the order minimum. Shipping weight on the jar is 1.46 lbs. For an MRO crib that burns through #10 hardware, the jar is the stocking unit rather than a loose each.
7) Can I get this 10-24 brass screw in a different length or a larger quantity?
Other sizes and quantities in the JRMB round head brass series are available by request. The JRMB96 itself is the 10-24 x 2 inch in a 100 count jar.
How fast can I get the Metallics JRMB96 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRMB96 come with a warranty?
Absolutely. The Metallics JRMB96 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRMB96?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRMB96 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!