Metallics JSHC102SS 10-24 x 2 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Image coming soon

Metallics JSHC102SS 10-24 x 2 in. Socket Head Hex Cap Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSHC102SS

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 2 in. Socket Head Hex Cap Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

  • Features

    • They retain thier mechanical ard performance capabilities at higher than ambient temperatures.
    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)
    • Socket head with Hex Drive
    • 10-24 Diameter, 2" Length
    • 18-8 Stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.185 - 0.19 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.303 - 0.312 in.
Fastener Length:
2
Hardness:
Rockwell B80
Hex Size:
May-32
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Stainless.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.66 lbs
Product Width:
3 in
Slot Depth:
0.09
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
24
Thread Type:
UNC
Wall Thickness:
0.065
Yield Strength:
30000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Details:
Cap Screw
Product Material:
18-8 Stainless

Metallics JSHC102SS – Frequently Asked Questions

1) What thread does a 10-24 socket head cap screw have, and will it run into a standard 10-24 tapped hole or nut?
Threading is UNC at 24 threads per inch on a number 10 diameter, so it mates with any standard 10-24 coarse tapped hole, nut, or strut insert. No fine thread option here.
2) Will the head on this cap screw fit into a counterbore or a tight channel?
Head width runs 0.303 to 0.312 inch and head height 0.185 to 0.190 inch, which is the standard socket head profile for a number 10 screw under ASME B18.3-2012. That is the dimension set to check your counterbore or clearance slot against.
3) How strong are these compared with an alloy steel socket head cap screw?
Rated 80,000 psi minimum tensile and 30,000 psi minimum yield, with hardness at Rockwell B80. That is well below an alloy steel socket cap, so for high-clamp structural connections choose alloy; pick these 18-8 screws when corrosion resistance matters more than clamp load. They also hold their mechanical properties above ambient temperature.
4) Are these stainless cap screws okay outdoors or in a wet mechanical room?
Material is 18-8 stainless, the austenitic grade used for general corrosion resistance on exterior and damp interior work such as rooftop equipment, wash-down areas, and damp electrical rooms. It is non-magnetic class stainless rather than a hardened alloy screw, so strength is lower than a black oxide alloy socket cap.
5) Do these screws meet Buy American and ARRA requirements for a government or institutional job?
The JSHC102SS is flagged compliant for both Buy American and ARRA, which is what a public-works or federally funded submittal usually asks for on fasteners. Country of origin is listed as multiple.
6) Is a 2 inch screw long enough to go through strut plus a bracket, or will it bottom out?
Fastener length is 2 inches measured below the head, which is full-length thread engagement for stacking a bracket, washer, and channel nut on typical electrical support work. Because the length exceeds three times the number 10 diameter, these screws are subject to tensile, yield, elongation, and reduction of area testing, with elongation at 10 percent minimum and reduction of area at 33 percent minimum.
7) I need a different length or diameter in the same stainless socket head screw. Can I get it?
Yes. The Metallics SHC series covers other sizes and jar quantities beyond the 10-24 x 2 inch JSHC102SS, available by request. Give the diameter, thread, and length you need and keep the 18-8 stainless material call-out.
8) How much does a jar of these 10-24 x 2 inch stainless cap screws weigh?
A jar comes in at 1.66 lbs, with the package measuring 3 by 3 by 3.6 inches. Useful if you are kitting out a van or counting shipping weight on a bulk fastener order.
How fast can I get the Metallics JSHC102SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC102SS come with a warranty?
Absolutely. The Metallics JSHC102SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC102SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC102SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!