Metallics JSHC3212SS 10-32 x 1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.66
$0.66
Image coming soon

Metallics JSHC3212SS 10-32 x 1/2 in. Socket Head Hex Cap Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSHC3212SS

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.66
$0.66
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 1/2 in. Socket Head Hex Cap Screws - 18-8 Stainless - 100qty

  • Features

    • 10-32 Diameter, 1/2" Length
    • They retain thier mechanical ard performance capabilities at higher than ambient temperatures.
    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)
    • Socket head with Hex Drive
    • 18-8 Stainless Material

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.185 - 0.19 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.303 - 0.312 in.
Fastener Length:
2-Jan
Hardness:
Rockwell B80
Hex Size:
May-32
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Stainless.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.67 lbs
Product Width:
3 in
Slot Depth:
0.09
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Thread Type:
UNF
Wall Thickness:
0.065
Yield Strength:
30000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Details:
Cap Screw
Product Material:
18-8 Stainless

Metallics JSHC3212SS – Frequently Asked Questions

1) Will a 10-32 socket head cap screw thread into a standard 10-32 tapped hole or nut?
Yes. The Metallics JSHC3212SS is a 10-32 UNF thread with 32 threads per inch, so it mates with any 10-32 tapped hole, nut, or strut insert cut to that thread. Length under the head is 1/2 inch, which sets your usable grip: subtract your material thickness from that 1/2 inch to see how much thread actually engages the tapped hole.
2) Are 18-8 stainless cap screws okay for outdoor or damp electrical enclosures?
18-8 stainless is the austenitic grade used for general corrosion resistance, which is why these show up on outdoor enclosures, strut, and wash-down areas where plated steel rusts out. They also hold their mechanical and performance capability above ambient temperature, so they suit warm equipment rooms and enclosures near heat sources. For heavy chloride exposure (coastal or pool chemical rooms) a 316 stainless screw is the step up.
3) How strong are these stainless socket head cap screws compared with a Grade 5 steel bolt?
Rated at 80,000 psi minimum tensile and 30,000 psi minimum yield, with a hardness of Rockwell B80. That is well below a Grade 5 or alloy-steel socket cap screw, which is the normal trade-off for stainless: you gain corrosion resistance and lose clamp load. If your connection is structural or highly loaded, spec an alloy socket head cap screw instead; for enclosure covers, brackets, ground straps, and equipment mounting, this rating is the usual choice.
4) What size hex key drives these 10-32 socket head cap screws?
It is an internal hex (Allen) drive in a socket head, not a slotted or Phillips head, so you need a hex key rather than a screwdriver. Head width across the socket head measures 0.303 to 0.312 in. and head height 0.185 to 0.190 in., which matters if the screw sits in a counterbore or a tight channel. Match the key to the socket by trial if you do not have the manufacturer's spec sheet in hand.
5) Do these cap screws meet a dimensional standard I can put on a submittal?
They are built to ASME B18.3-2012, the dimensional standard for socket head cap screws, so head and thread geometry will match anything else specified to that standard. Material is 18-8 stainless with 80,000 psi minimum tensile and 30,000 psi minimum yield if the spec sheet asks for mechanical values as well.
6) Do these screws qualify for Buy American or ARRA-funded work?
Metallics flags the JSHC3212SS as both ARRA compliant and Buy American compliant. Country of origin is listed as multiple, so if your funding agency wants a specific origin on the mill paperwork, state that requirement when you order.
How fast can I get the Metallics JSHC3212SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC3212SS come with a warranty?
Absolutely. The Metallics JSHC3212SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC3212SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC3212SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!