Metallics JSHC321SS 10-32 x 1 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Image coming soon

Metallics JSHC321SS 10-32 x 1 in. Socket Head Hex Cap Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSHC321SS

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 1 in. Socket Head Hex Cap Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

  • Features

    • They retain thier mechanical ard performance capabilities at higher than ambient temperatures.
    • Socket head with Hex Drive
    • 18-8 Stainless Material
    • 10-32 Diameter, 1" Length
    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.185 - 0.19 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.303 - 0.312 in.
Fastener Length:
1
Hardness:
Rockwell B80
Hex Size:
May-32
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Stainless.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.98 lbs
Product Width:
3 in
Slot Depth:
0.09
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Thread Type:
UNF
Wall Thickness:
0.065
Yield Strength:
30000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Details:
Cap Screw
Product Material:
18-8 Stainless

Metallics JSHC321SS – Frequently Asked Questions

1) Is the Metallics JSHC321SS 10-32 cap screw sold individually or by the jar?
It ships as a 100-count jar, and 100 pieces is the order minimum. So a single order gets you a jar of one hundred 10-32 x 1 in. socket head cap screws, not a loose piece.
2) Will a 10-32 x 1 in. socket head cap screw thread into a standard 10-32 tapped hole or strut nut?
Yes. The thread is 10-32 UNF at 32 threads per inch, cut to ASME B18.3-2012, so it mates with any standard 10-32 tapped hole, 10-32 channel nut, or 10-32 nut. Usable grip is the full 1 in. length.
3) What size hex key do I need to drive a 10-32 socket head cap screw?
The JSHC321SS has a socket head with an internal hex drive, and a 10-32 socket head cap screw takes a 5/32 in. Allen key. Socket depth on these is 0.09 in., so seat the key fully before applying torque to avoid rounding out the socket.
4) Is 18-8 stainless the right choice for outdoor or wet-location electrical work?
The material is 18-8 stainless, the austenitic 300-series grade used where plain or zinc-plated steel would rust, so it suits damp interiors, exterior strut runs, and wash-down areas. It also holds its mechanical properties above ambient temperature, which matters in attic and mechanical-room runs. For salt-spray coastal exposure, 316 stainless is the step up.
5) What are the strength numbers on these stainless cap screws, and are they as strong as an alloy socket head screw?
Rated at 80,000 psi minimum tensile and 30,000 psi minimum yield, with a hardness of Rockwell B80. That is normal for 18-8 stainless and well below a black alloy-steel socket head cap screw, which is heat treated to a much higher tensile. Elongation is 10 percent minimum and reduction of area 33 percent minimum, so these are ductile rather than hard. Pick stainless for corrosion resistance, alloy for load.
6) Do these Metallics cap screws meet Buy American and ARRA requirements for a public project?
Both the Buy American and ARRA fields on the JSHC321SS are flagged compliant. Country of origin is listed as multiple, so if your specification demands a single documented origin, request the mill paperwork for the lot you receive.
7) How much does a jar of 100 of these 10-32 screws weigh and how big is the container?
The packed jar comes in at 0.98 lbs and measures 3 in. long by 3 in. wide by 2.15 in. high, which makes it easy to keep a jar on the van or in a parts bin.
How fast can I get the Metallics JSHC321SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC321SS come with a warranty?
Absolutely. The Metallics JSHC321SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC321SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC321SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!