Metallics JSHC61SS 6-32 x 1 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.57
$0.57
Image coming soon

Metallics JSHC61SS 6-32 x 1 in. Socket Head Hex Cap Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSHC61SS

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.57
$0.57
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 1 in. Socket Head Hex Cap Screws - 18-8 Stainless - 100qty

  • Features

    • They retain thier mechanical ard performance capabilities at higher than ambient temperatures.
    • Socket head with Hex Drive
    • 6-32 Diameter, 1" Length
    • 18-8 Stainless Material
    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.134 - 0.138 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.218 - 0.226 in.
Fastener Length:
1
Hardness:
Rockwell B80
Hex Size:
Jul-64
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Stainless.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.49 lbs
Product Width:
3 in
Slot Depth:
0.064
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Thread Type:
UNC
Wall Thickness:
0.047
Yield Strength:
30000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Details:
Cap Screw
Product Material:
18-8 Stainless

Metallics JSHC61SS – Frequently Asked Questions

1) Will a 6-32 x 1 inch socket head cap screw thread into a standard 6-32 tapped hole or nut?
Yes. The Metallics JSHC61SS is a 6-32 UNC screw at 32 threads per inch, so it mates with any standard 6-32 coarse tapped hole, nut, or threaded insert. Overall length is 1 inch, which is the usable grip plus material thickness you need to account for.
2) Are these 18-8 stainless cap screws okay for outdoor or damp electrical enclosures?
The screw is 18-8 stainless, the common 300 series austenitic grade used where plain steel would rust, so it holds up in wet and outdoor enclosure work better than a zinc-plated screw. One caution a contractor should know: 18-8 is not a hardened alloy fastener. Tensile is 80,000 psi minimum with 30,000 psi minimum yield and Rockwell B80 hardness, so do not substitute it where a black alloy socket cap screw (typically much higher strength) is specified structurally.
3) Do these socket head cap screws meet a dimensional standard I can put on a submittal?
Yes. The JSHC61SS is made to ASME B18.3-2012, the dimensional standard for socket cap screws, so head and socket geometry will match any drawing or spec calling out B18.3. It is also flagged ARRA compliant and Buy American compliant in the product record, which matters on federally funded work.
4) Can I buy just a few 6-32 x 1 in. stainless socket cap screws, or do I have to take a full jar?
These ship in jar packaging with an order minimum of 100 count, so the practical buy is a 100-piece jar rather than a handful of loose screws. For a panel build or a repeat MRO item that is usually what you want on the shelf anyway.
5) Will these hold their strength in a hot enclosure or near heat-producing equipment?
18-8 stainless socket cap screws retain their mechanical and performance capability above ambient temperature, which is one reason they get specified in enclosures and equipment mounting where a plated carbon screw would be marginal. Rated strength is 80,000 psi minimum tensile and 30,000 psi minimum yield.
6) What size hex key drives a 6-32 socket head cap screw?
It takes a hex (Allen) key, not a screwdriver, since the head is a socket head with a hex drive. For 6-32 socket cap screws the key is 7/64 in., so keep that size in the kit if you are installing a jar of these.
How fast can I get the Metallics JSHC61SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC61SS come with a warranty?
Absolutely. The Metallics JSHC61SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC61SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC61SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!