You may also like
Metallics RSB93 10-24 x 1 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - Each
Model: MET-RSB93
10-24 x 1 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - 100qty
Additional Notes
Standard Package Square Plastic Jar | Two drives in one head | other sizes and quantities...
Metallics
$50.29
$0.29
Metallics RSB17 10-32 x 3/4 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - Each
Model: MET-RSB17
10-32 x 3/4 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - 100qty
Features
Hex Machine Screw Nut is designed to be used specifically with machine screws.
Round head with slotted...
Metallics
$50.24
$0.24
Metallics RSB106 1/4-20 x 3 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - Each
Model: MET-RSB106
1/4-20 x 3 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - 100qty
Additional Notes
Standard Package Square Plastic Jar | Two drives in one head | other sizes and quantities...
Metallics
$192.86
Metallics RSB18 10-32 x 1 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - Each
Model: MET-RSB18
10-32 x 1 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - 100qty
Additional Notes
Standard Package Square Plastic Jar | Two drives in one head | other sizes and quantities...
Metallics
$50.29
$0.29
Metallics RSB21 10-32 x 2 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - Each
Model: MET-RSB21
10-32 x 2 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - 100qty
Additional Notes
Standard Package Square Plastic Jar | Two drives in one head | other sizes and quantities...
Metallics
$50.39
$0.39
10-24 x 3/4 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - 100qty
Additional Notes
- Standard Package Square Plastic Jar | Two drives in one head | other sizes and quantities available by request | Steel machine screws which have a nominal diameter smaller than #4 are not subject to tensile testing. No. 4 and No. 5 machine screws which are shorter than 1/2" are not subject to tensile testing. Steel machine screws of diameters No. 6 to 1/2" inclusive, which are shorter than either 1/2" or 3D (where D is the nominal screw size in inches) are not subject to tensile testing. Such steel machine screws of a size to be tested shall meet the tensile load requirements listed above.
Features
- Round head with slotted and Phillips Drive
- Includes Hex nut
- Hex Machine Screw Nut is designed to be used specifically with machine screws.
- Steel Zinc Material
- 10-24 Diameter, 3/4" Length
Manufacturer Resources
Product Specs
- Minimum Purchase:
- 100 units
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Dimensional Standard:
- ANSI B18.6.3
- Division:
- Electrical H1
- Drive Type:
- Slotted/Phillips
- Driver Size:
- #2
- Fastener Head Height:
- 0.123 - 0.137 in.
- Fastener Head Type:
- Round
- Fastener Head Width:
- 0.334 - 0.359 in.
- Fastener Length:
- 4-Mar
- Field Application:
- Electrical, Plumbing, Heating, Air Conditioning Industries
- Hardness:
- Rockwell B70-B100
- Language Code:
- EN
- Material Standard:
- AISI 1006 - 1022
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Stove_Bolt.pdf
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- JR
- Pack Type:
- Clamshell
- Phillips Recess Depth:
- 0.119
- Phillips Recess Diameter:
- 0.182 - 0.195
- Phillips Recess Width:
- 0.031
- Product Group:
- Bolts
- Product Height:
- 2.15 in
- Product Length:
- 3 in
- Product Weight:
- 0.85 lbs
- Product Width:
- 3 in
- Slot Depth:
- 0.065 - 0.087
- Slot Width:
- 0.05 - 0.06
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 60000 psi minimum
- Thread Direction:
- Right Hand
- Thread Per Inch:
- 24
- Department:
- Fasteners
- Product Subgroup:
- Specialty Bolts
- Product Type:
- Stove Bolt
- Type2:
- Stove Bolt
- Series:
- RSB
- Product Finish:
- Zinc
- Product Details:
- Stove Bolt
- Product Material:
- Steel Zinc
Metallics RSB92 – Frequently Asked Questions
1) Does the Metallics RSB92 stove bolt come with nuts, or do I have to buy those separately?
Hex nuts are included with the RSB92. The nut supplied is a hex machine screw nut, which is the nut type made specifically for machine screw threads, so no separate hardware is needed to make up the joint. The bolts are 10-24 x 3/4 inch with right-hand threads at 24 threads per inch.
2) Does the RSB92 meet the standard dimensions my spec calls out for machine screws?
Head, drive, and thread geometry are built to ANSI B18.6.3, the dimensional standard for slotted and recessed head machine screws, with material to AISI 1006 to 1022. If your drawing calls out an ANSI B18.6.3 round head combination drive machine screw in 10-24, this matches the callout.
3) Are these stove bolts Buy American or ARRA compliant for a government or federally funded job?
No. The RSB92 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your contract carries domestic sourcing requirements, this part will not satisfy them.
4) What driver do I need for the RSB92 combo head stove bolt?
It is a combination head, slotted and Phillips in the same round head, so you can run it with either a flat blade or a Phillips. The Phillips recess takes a #2 driver. The slot is 0.05 to 0.06 inch wide and 0.065 to 0.087 inch deep, so a standard cabinet-tip flat blade seats fine.
5) Is a 10-24 x 3/4 in. stove bolt strong enough for hanging strut, straps, and box supports?
For general electrical and mechanical support work, yes. The steel is AISI 1006 to 1022 with a minimum tensile strength of 60,000 psi and a hardness of Rockwell B70 to B100, which is standard low-carbon machine screw material. It is not a structural or high-strength grade, so for rated structural connections or heavy suspended loads use a graded bolt specified by the engineer.
6) Can I use zinc plated stove bolts outdoors or in a wet location?
The RSB92 is zinc plated steel, which is a dry-location and light-duty corrosion finish. It holds up indoors and in protected areas, but in wet, washdown, coastal, or buried conditions zinc plating will eventually rust through. For those jobs move to stainless steel or hot dip galvanized machine screws.
7) How are Metallics RSB92 stove bolts packaged and what is the minimum I can order?
They ship 100 to a package with a 100-piece order minimum, in a jar unit of measure. Pack type is clamshell and the standard package is a square plastic jar. Other sizes and quantities are available by request.
8) What trades actually use these combo head stove bolts?
Metallics lists the RSB92 for the electrical, plumbing, heating, and air conditioning industries. Typical use is bolting straps, hangers, brackets, cover plates, and strut accessories where you need a bolt and nut rather than a tapped hole. The combination head means whatever driver is already on the belt will turn it, which is why it is a common MRO and service-truck stock item.
How fast can I get the Metallics RSB92 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics RSB92 come with a warranty?
Absolutely. The Metallics RSB92 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics RSB92?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics RSB92 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.