Metallics RSB17 10-32 x 3/4 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.24
$0.24
Metallics RSB17 10-32 x 3/4 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - 100qty

Metallics RSB17 10-32 x 3/4 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - Each

(No reviews yet) Write a Review

Model: RSB17
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.24
$0.24
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 3/4 in. Round Head Combo Stove Bolt Screws with Hex Nut - Steel Zinc - 100qty

  • Features

    • Hex Machine Screw Nut is designed to be used specifically with machine screws.
    • Round head with slotted and Phillips Drive
    • Includes Hex nut
    • Steel Zinc Material
    • 10-32 Diameter, 3/4" Length

  • Additional Notes

    • Standard Package Square Plastic Jar | Two drives in one head | other sizes and quantities available by request | Steel machine screws which have a nominal diameter smaller than #4 are not subject to tensile testing. No. 4 and No. 5 machine screws which are shorter than 1/2" are not subject to tensile testing. Steel machine screws of diameters No. 6 to 1/2" inclusive, which are shorter than either 1/2" or 3D (where D is the nominal screw size in inches) are not subject to tensile testing. Such steel machine screws of a size to be tested shall meet the tensile load requirements listed above.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ANSI B18.6.3
Division:
Electrical H1
Drive Type:
Slotted/Phillips
Driver Size:
#2
Fastener Head Height:
0.123 - 0.137 in.
Fastener Head Type:
Round
Fastener Head Width:
0.334 - 0.359 in.
Fastener Length:
4-Mar
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Stove_Bolt.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Clamshell
Phillips Recess Depth:
0.119
Phillips Recess Diameter:
0.182 - 0.195
Phillips Recess Width:
0.031
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.98 lbs
Product Width:
3 in
Slot Depth:
0.065 - 0.087
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Direction:
Right Hand
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Stove Bolt
Type2:
Stove Bolt
Series:
RSB
Product Finish:
Zinc
Product Details:
Stove Bolt
Product Material:
Steel Zinc

Metallics RSB17 – Frequently Asked Questions

1) Does the Metallics RSB17 stove bolt come with nuts, or do I have to order those separately?
Nuts are included. Each Metallics RSB17 10-32 x 3/4 in. round head stove bolt ships with a hex machine screw nut, which is the nut style made specifically for machine screw threads rather than a coarse-thread bolt nut. Nothing else is needed to make up the joint beyond a washer if your application calls for one.
2) Can I use these screws on a federally funded or Buy American job?
No. The RSB17 stove bolt is listed as not Buy American compliant and not ARRA compliant, with country of origin shown as multiple. If your specification carries a domestic sourcing requirement, this part will not satisfy it.
3) What driver do I need for the RSB17 combo head screw?
It is a combo head, so either a flat blade or a Phillips will drive it. The Phillips recess takes a #2 driver. Slot width runs 0.050 to 0.060 in. with a slot depth of 0.065 to 0.087 in., so a standard cabinet-tip flat blade seats properly. Handy on a panel job where you may only have one bit in the pouch.
4) How strong is a 10-32 zinc plated steel stove bolt like the Metallics RSB17?
Minimum tensile strength is 60,000 psi, with hardness in the Rockwell B70 to B100 range, made from AISI 1006 to 1022 steel. That is standard low carbon machine screw material, fine for mounting devices, straps, brackets and enclosure hardware, not a structural or high load connection.
5) Are these zinc stove bolts suitable for outdoor or damp locations?
The RSB17 is steel with a zinc finish, which is a plating for indoor and dry location corrosion resistance. For wet, coastal or chemically aggressive locations, zinc plated steel is the wrong choice and you want stainless machine screws instead.
6) What trades actually use a 10-32 x 3/4 in. stove bolt with hex nut?
Metallics lists the field application as the electrical, plumbing, heating and air conditioning industries. In practice it is the through-bolt a contractor reaches for when mounting straps, hangers, brackets, cover plates and enclosure hardware where there is no tapped hole and the nut carries the load on the back side.
7) Is a 10-32 machine screw this short subject to tensile testing?
Not necessarily. Per the notes supplied with the RSB17, steel machine screws of No. 6 through 1/2 in. diameter that are shorter than either 1/2 in. or 3D (three times the nominal diameter) are not subject to tensile testing. A #10 screw at 3/4 in. length sits near that threshold. Screws of a size that is tested must meet the 60,000 psi minimum.
How fast can I get the Metallics RSB17 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics RSB17 come with a warranty?
Absolutely. The Metallics RSB17 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics RSB17?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics RSB17 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!