Metallics JRM152SLT 10-24 x 5 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JRM152SLT 10-24 x 5 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JRM152SLT 10-24 x 5 in. Round Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM152SLT
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 5 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Steel Zinc Material
    • 10-24 Diameter, 5" Length
    • Round head with slotted Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.123 - 0.137 in.
Fastener Head Type:
Round
Fastener Head Width:
0.334 - 0.359 in.
Fastener Length:
5
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
7.25 in
Product Length:
4.5 in
Product Weight:
2.99 lbs
Product Width:
4.5 in
Recess Penetration Gaging Depth:
0.082 - 0.108
Slot Depth:
0.065 - 0.087
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
24
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM152SLT – Frequently Asked Questions

1) Do these Metallics screws meet Buy American or ARRA requirements on a public job?
Metallics lists the JRM152SLT as ARRA compliant and Buy American compliant, with country of origin China. If your specification requires domestic melt and manufacture rather than the broader compliance flag, confirm which standard the contract is written to before you submit these.
2) How strong are these screws, and are they hard enough for repeated service work?
Rated at 60,000 psi minimum tensile strength with a hardness of Rockwell B70-B100, made from AISI 1006-1022 low carbon steel. That is standard commercial machine screw material, fine for fixture hanging, device mounting and panel work. It is not a hardened structural fastener, so do not treat it as a substitute for a graded bolt in a load-bearing connection.
3) Is zinc plated steel okay for outdoor or damp locations?
The JRM152SLT is steel with a zinc finish, which is a plated corrosion coating meant for dry indoor and protected service. For wet locations, exterior runs or coastal exposure, stainless is the better call. Zinc plating handles indoor fixture and device work without discoloring, but it will eventually rust where it stays wet.
4) How are these 10-24 x 5 in. screws packaged, and is there a minimum I have to buy?
They come in a jar, with an order minimum of 100 count. Weight on the pack is 2.99 lbs. That is a shop or truck-stock quantity rather than a one-off repair purchase, which suits MRO stockrooms and contractors who want a jar on the shelf for deep-box mounting.
5) Is the JRM152SLT the same screw as the shorter JRM sizes, just longer?
Same family. The JRM series is Metallics round head slotted machine screws, and JRM152SLT is the 10-24 x 5 in. member of it. Head geometry, drive, steel and zinc finish stay consistent across the series, so if you already stock shorter 10-24 JRM screws these match them in appearance and drive, only longer. Other sizes and quantities are available on request.
How fast can I get the Metallics JRM152SLT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM152SLT come with a warranty?
Absolutely. The Metallics JRM152SLT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM152SLT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM152SLT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!