You may also like
1/0-8 Ground lay-in Lug Alu: 1-
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Family:
- Connectivity
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
Metallics LL108AL – Frequently Asked Questions
1) What wire sizes does the Metallics LL108AL grounding lug accept?
The LL108AL lay-in ground lug takes conductors from 1/0 AWG down to 8 AWG, so it covers the common ground and bonding conductor sizes in that range on one lug instead of needing separate parts per size.
2) Is the LL108AL lug aluminum or copper, and can I use it on aluminum conductors?
It is an aluminum-body lug. Aluminum-bodied lay-in lugs of this type are the ones used where the conductor or the equipment is aluminum, and they are rated by the manufacturer for both aluminum and copper conductors when so marked, so check the marking stamped on the lug body for the AL/CU designation before terminating copper.
3) What is a lay-in ground lug and why use one instead of a crimp or compression connector?
A lay-in lug has an open slot, so the ground conductor drops in from the side and is clamped by a setscrew. No crimp tool, no dies, and you can lay a continuous conductor in without cutting it, which is why it is the usual choice for bonding enclosures, panels, racks, and ground bars. A compression lug is the better pick when you need a permanent, tool-verified termination or the conductor must land on a bolted stud.
4) Can I use the LL108AL to bond a ground wire to an electrical enclosure or panel?
Yes, that is the job this lug is built for. It is an electrical connectivity component, and a lay-in ground lug mounts to the enclosure wall, panel, or ground bar with a screw through its mounting hole and clamps the equipment grounding conductor under the setscrew. Mounting hardware for the specific enclosure is supplied separately in most cases, so confirm what hardware your opening already has.
5) What is the exact part number to order this Metallics grounding lug?
Order it by manufacturer part number LL108AL from Metallics. That is the aluminum lay-in ground lug for 1/0 through 8 AWG, and it is a single-model item, so there are no finish or size options to specify.
How fast can I get the Metallics LL108AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics LL108AL come with a warranty?
Absolutely. The Metallics LL108AL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics LL108AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics LL108AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.