You may also like
Blackburn Lay-In Grounding Lug No6STR - 250MCM Aluminum Conductor
Model: BLACK-LL2506
Blackburn Lay-In Grounding Lug No6STR - 250MCM Aluminum ConductorProfessional mechanical grounding solution for reliable electrical connectionsThe Blackburn Lay-In Grounding Lug delivers dependable...
Blackburn
$79.15
$15.86
250mcm-6 Ground lay-in Lug Alu:
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Family:
- Connectivity
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
Metallics LL2506AL – Frequently Asked Questions
1) What wire range does the Metallics LL2506AL lay-in ground lug accept?
The LL2506AL covers conductors from 250 MCM down to 6 AWG, so one lug handles everything from a large service-size grounding electrode conductor to a 6 AWG equipment ground.
2) Is the LL2506AL ground lug aluminum or copper, and can it be used on copper conductors?
It is an aluminum-body lay-in lug. Aluminum-bodied lugs of this type are normally marked AL9CU, meaning they are rated for both aluminum and copper conductors, so verify that marking on the lug itself before terminating copper.
3) What is the difference between a lay-in ground lug like the LL2506AL and a standard compression or set-screw terminal lug?
A lay-in lug has an open slot, so the grounding conductor drops in from the side and is clamped by the screw. You do not have to cut the conductor or feed an end through a barrel, which is what makes it the usual choice for a continuous grounding electrode conductor running past multiple bond points. A compression or barrel lug needs a free conductor end and a crimp tool. The LL2506AL is the lay-in style, covering 250 MCM to 6 AWG.
4) Where is a Metallics LL2506AL ground lug typically used on a job?
It is an electrical grounding and bonding connector, used to land a grounding or bonding conductor on a panel enclosure, a ground bar, a water pipe bond point, structural steel, or equipment housings. Anywhere in the 6 AWG to 250 MCM range you need a bolted ground termination, this one lug covers it.
5) Is LL2506AL the only part number on the Metallics lay-in lug, or are there options to pick?
There is a single configuration, model LL2506AL. No finish, size, or hardware options to select, so ordering by that part number gets you the aluminum 250 MCM to 6 AWG lay-in ground lug.
How fast can I get the Metallics LL2506AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics LL2506AL come with a warranty?
Absolutely. The Metallics LL2506AL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics LL2506AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics LL2506AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.