You may also like
1/0 AWG SIMPULL HEAD 12" PULLING DEVICE
Features
- Staggered lengths
- Saves Time
- Lowest Profile Available
- Available in sizes 1 AWG - 1000 kcmil AWG
Manufacturer Resources
Product Specs
- Items In Inner Pack:
- 5
- Batteries Included :
- No
- Batteries Required :
- No
- Commercial Residential:
- Commercial
- Csa Certified:
- No
- Does The Item Contain Mercury :
- No
- Item Extension:
- 12.6
- Item Height:
- 1.6
- Item Weight:
- 0.462
- Item Width:
- 3.9
- Master Pack Height:
- 4.5
- Package Length:
- 17.5
- Packaging Type:
- cardboard
- Product Color:
- Silver
- Product Material:
- Steel
Southwire SPH1/0-12 – Frequently Asked Questions
1) What wire size does the Southwire SPH1/0-12 SIMpull head fit?
The SPH1/0-12 is sized for 1/0 AWG conductor. It is one size in a range that runs from 1 AWG up to 1000 kcmil, so each head is matched to a specific conductor size rather than adjusting across sizes. Pulling a different gauge means ordering the head built for that gauge.
2) Will the SPH1/0-12 pulling head clear a tight conduit bend or a crowded raceway?
It is the lowest profile head Southwire offers, and the part measures 12.6 by 3.9 by 1.6 inches. The 1.6 inch dimension is the height, which is the figure that decides whether the head drags at a sweep or a coupling. The staggered-length design also keeps multiple heads from bunching into one thick bundle at the pull point.
3) How many SIMpull pulling heads come in a pack?
They ship five to an inner pack, in cardboard packaging. That matters on a multi-conductor pull, since a typical three-phase-plus-neutral-plus-ground run needs a head on each conductor.
4) Why are SIMpull heads made in staggered lengths?
Staggering keeps the heads from lining up side by side at the same point in the conduit. Spreading them out along the pull reduces the cross-section at any one spot and helps the bundle turn bends without jamming. It is the reason a set of heads on a multi-conductor pull goes through easier than a hand-taped basket.
5) Is the Southwire SPH1/0-12 head steel or plastic?
Steel, finished in silver. Each head weighs 0.462 pounds, so adding heads to a multi-conductor pull adds very little to what the puller sees.
6) Is this pulling head meant for commercial work or residential branch wiring?
Commercial. At 1/0 AWG it belongs on feeder and service conductors pulled through conduit, not on the small branch circuits typical of house wiring.
7) What is the part number I should order for a 1/0 SIMpull head, and how long is the shipping box?
Order Southwire SPH1/0-12. The shipping package runs 17.5 inches long with a 4.5 inch master pack height, which is worth knowing if you are staging boxes on a job cart or a gang box.
How fast can I get the Southwire SPH1/0-12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Southwire SPH1/0-12 come with a warranty?
Absolutely. The Southwire SPH1/0-12 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Southwire SPH1/0-12?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Southwire SPH1/0-12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.