You may also like
1/0 AWG SIMPULL HEAD 6" PULLING DEVICE
Features
- Available in sizes 1 AWG - 1000 kcmil AWG
- Staggered lengths
- Lowest Profile Available
- Saves Time
Manufacturer Resources
Product Specs
- Items In Inner Pack:
- 5
- Batteries Included :
- No
- Batteries Required :
- No
- Commercial Residential:
- Commercial
- Csa Certified:
- No
- Does The Item Contain Mercury :
- No
- Item Extension:
- 12.6
- Item Height:
- 1.6
- Item Weight:
- 0.462
- Item Width:
- 3.9
- Master Pack Height:
- 4.5
- Package Length:
- 12.6
- Packaging Type:
- cardboard
- Product Color:
- Silver
- Product Material:
- Steel
Southwire SPH1/0-06 – Frequently Asked Questions
1) What wire size does the Southwire SPH1/0-06 SIMpull head fit?
The SPH1/0-06 pulling head is sized for 1/0 AWG conductor. It is one size in a range that runs from 1 AWG up to 1000 kcmil, so match the head to the conductor you are pulling. Putting a 1/0 head on a different gauge is not a fit.
2) How long is the Southwire 1/0 SIMpull pulling head and will it clear a tight conduit bend?
The 1/0 head measures 12.6 inches long, 3.9 inches wide and 1.6 inches high. Southwire builds these as the lowest profile head available and staggers lengths across the conductors so the heads do not bunch into one fat bundle at the same point in the raceway. That staggering plus the low height is what gets a multi-conductor pull through sweeps and around an LB.
3) Do I need a different SIMpull head for 4/0 or 500 kcmil?
Yes. The SPH1/0-06 is the 1/0 AWG head only. Southwire makes the SIMpull head in sizes from 1 AWG through 1000 kcmil, so order the head matched to each conductor size on the pull.
4) How many pulling heads come in a pack of the Southwire SPH1/0-06?
Five heads per inner pack. Since a single conduit run usually needs one head per conductor, a 5-pack covers a three-phase run plus neutral and ground on 1/0.
5) What is the SIMpull head made of?
Steel, in a silver finish. That is the load-bearing element between your rope or pulling grip and the conductor.
6) Is the Southwire SPH1/0-06 head meant for commercial jobs or residential?
It is classed as a commercial product. Pulling heads at 1/0 and larger show up on feeder and service runs in commercial and industrial raceway, not on typical dwelling branch circuits.
7) How much does one SIMpull 1/0 head weigh?
About 0.462 lb each. Light enough that adding one per conductor does not meaningfully change what your tugger sees on the line.
How fast can I get the Southwire SPH1/0-06 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Southwire SPH1/0-06 come with a warranty?
Absolutely. The Southwire SPH1/0-06 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Southwire SPH1/0-06?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Southwire SPH1/0-06 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.