Metallics QTEKD19M 10 x 1-1/2 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.56
$0.56
Metallics QTEKD19M 10 x 1-1/2 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 1000qty

Metallics QTEKD19M 10 x 1-1/2 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - Each

(No reviews yet) Write a Review

Model: QTEKD19M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.56
$0.56
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1-1/2 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 1000qty

  • Features

    • #2 Drill Point
    • Made in the USA
    • Domestic Steel Zinc Material
    • 5/16 Head with Quadrive Drive
    • 10 Diameter, 1-1/2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
1000 units
Division:
Electrical H1
Product Group:
Fasteners
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Domestic Steel Zinc

Metallics QTEKD19M – Frequently Asked Questions

1) Will the Metallics QTEKD19M self-drilling screw go through metal studs without a pilot hole?
Yes. The QTEKD19M has a #2 drill point, so it drills its own hole and taps its own thread in one pass through light gauge steel. No pre-drilling and no separate tap. The #2 point is the common choice for metal stud and track work where sheet steel thickness is light to medium.
2) Are Metallics QTEKD19M screws made in the USA for Buy American jobs?
Yes. The QTEKD19M is made in the USA from domestic steel, which is what public and institutional specs with domestic sourcing language are looking for on fasteners.
3) What driver bit do I need for the 5/16 head Quadrive screw?
The head is a 5/16 inch hex with a Quadrive drive, so a 5/16 inch hex driver or magnetic nutsetter in a drill or impact driver runs it. The Quadrive feature also lets a square drive bit engage the same head, which helps when the fastener is in a tight spot where a nutsetter will not seat square.
4) How long is the #10 x 1-1/2 in. Metallics screw and how much material will it fasten through?
It is a #10 diameter screw at 1-1/2 inches of length under the head. Subtract the drill point and the steel it has to cut and you have roughly an inch of usable grip, so it suits fastening strap, clips, boxes, or plywood backing to a metal stud rather than thick stacked assemblies.
5) Are these Metallics screws rated for outdoor or wet locations?
These are domestic steel with a zinc plating. Zinc plating is a mild corrosion coating meant for dry interior service, so for exterior, damp, or coastal work use a stainless or a heavier coated fastener instead.
6) Can I use a self-drilling screw like this into concrete or masonry?
No. The QTEKD19M is a self-drilling and tapping screw with a #2 point intended for steel. Concrete, block, and brick need a masonry anchor or a concrete screw. Into wood alone a self-drilling point also tends to oversize the hole and lose holding power.
7) How are these self-drilling screws packaged, and what is the part number to reorder?
Order under Metallics part number QTEKD19M. It is a 1000 piece count of the 10 x 1-1/2 inch 5/16 head screw, so it is set up for electrical and metal framing crews buying by the box rather than the handful.
How fast can I get the Metallics QTEKD19M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics QTEKD19M come with a warranty?
Absolutely. The Metallics QTEKD19M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics QTEKD19M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics QTEKD19M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!