Metallics QTEKD18M 10 x 1-1/4 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.53
$0.53
Metallics QTEKD18M 10 x 1-1/4 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 1000qty

Metallics QTEKD18M 10 x 1-1/4 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - Each

(No reviews yet) Write a Review

Model: QTEKD18M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.53
$0.53
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1-1/4 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 1000qty

  • Features

    • #2 Drill Point
    • 5/16 Head with Quadrive Drive
    • 10 Diameter, 1-1/4" Length
    • Domestic Steel Zinc Material
    • Made in the USA

Manufacturer Resources

Product Specs

Minimum Purchase:
1000 units
Division:
Electrical H1
Product Group:
Fasteners
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Domestic Steel Zinc

Metallics QTEKD18M – Frequently Asked Questions

1) What thickness of steel will a #2 drill point self-drilling screw go through?
The Metallics QTEKD18M is a #2 drill point screw, which is the point sized for light to medium gauge steel, roughly 20 gauge up to about 1/8 inch material. It drills its own hole and taps its own thread in one pass, so no pilot hole is needed. For heavier structural steel you need a larger point number.
2) Is a zinc plated self-drilling screw okay for outdoor or damp locations?
The QTEKD18M is domestic steel with zinc plating, which is an indoor and dry-location finish. Zinc gives light corrosion protection for interior strut, raceway, and sheet metal work, but for exterior exposure, roof decks, or wet areas you want a stainless or coated exterior-rated fastener instead.
3) What driver bit fits the Quadrive head on the Metallics QTEKD18M screw?
It takes a square drive bit. Quadrive is a square recess, so a #2 square bit is the normal match for a #10 diameter screw. The head itself is a 5/16 hex washer style head, which also lets you run it with a 5/16 inch magnetic hex driver if you prefer a nut setter over a bit.
4) Are Metallics QTEKD18M screws made in the USA for a Buy American job?
Yes. These are domestic steel, zinc plated, and made in the USA, which is what procurement officers on government, school, and healthcare work need to see for domestic-content requirements on fasteners.
5) Do I need a pilot hole for the Metallics QTEKD18M, or does it drill its own?
No pilot hole. The drill point on the QTEKD18M cuts the hole and the thread form taps it as the screw advances, so it is one operation with a screwgun. Run it at a moderate speed with steady pressure; too fast and the point work-hardens the steel and burns up before it bites.
6) What is the exact part number to order these #10 x 1-1/4 self-drilling screws?
Order Metallics part number QTEKD18M. That number covers the #10 x 1-1/4 inch, 5/16 head Quadrive self-drilling and tapping screw with a #2 drill point in domestic zinc plated steel.
How fast can I get the Metallics QTEKD18M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics QTEKD18M come with a warranty?
Absolutely. The Metallics QTEKD18M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics QTEKD18M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics QTEKD18M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!