Metallics JDSP182 10 x 1 in. 5...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.11
$0.11
Metallics JDSP182 10 x 1 in. 5/16 Hex Head Phillips Sharp Point Tapping Screws - Steel Zinc - 100qty

Metallics JDSP182 10 x 1 in. 5/16 Hex Head Phillips Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JDSP182
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.11
$0.11
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1 in. 5/16 Hex Head Phillips Sharp Point Tapping Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • 10 Diameter, 1" Length
    • Hex 5/16 Head with Phillips Drive

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2013
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.105 - 0.12 in.
Fastener Head Type:
Hex
Fastener Head Width:
0.305 - 0.312 in.
Fastener Length:
1
Hardness:
RockweII C28-38
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Diameter:
0.178
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.75 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.102 - 0.127
Screw Point Type:
Gimlet Point
Sub Division:
Electrical-E H2
Thread Per Inch:
12
Thread Standard:
ASME B18.6.4
Torsional Strength:
48 lb-in minimum
Washer Od:
0.384 - 0.414 in.
Washer Thickness:
0.019 - 0.031 IN
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JDSP
Product Finish:
Zinc
Product Details:
Type A Tapping Screw
Product Material:
Steel Zinc

Metallics JDSP182 – Frequently Asked Questions

1) What driver do I need for the Metallics JDSP182 tapping screw, and can I run it with a hex driver instead?
Both work. The JDSP182 has a combination head: a 5/16 hex (head width 0.305 to 0.312 in.) with a Phillips recess that takes a #2 driver. On a drill you can socket the 5/16 hex for speed and torque, or drop to the #2 Phillips in tight spots where a socket won't clear. Recess diameter is 0.178 in. with a gaging depth of 0.102 to 0.127 in.
2) Will a #10 Type A sharp point screw bite into sheet metal studs without pre-drilling?
That is what the gimlet point on this #10 x 1 in. Type A tapping screw is for. It is a sharp-point, coarse-thread screw at 12 threads per inch, meant to be driven into thin sheet metal, sheet metal studs, and wood or composition board without a pilot hole. For thicker steel or structural plate you want a drill point (self-drilling) screw instead, not a Type A.
3) We have a Buy American clause on a federal job. Do these Metallics screws qualify?
The JDSP182 is flagged both ARRA compliant and Buy American compliant in the manufacturer data, with country of origin China. On federally funded work the compliance flag and the origin both get reviewed, so hand your compliance officer both values before you commit the material.
4) Does the JDSP182 screw have a built-in washer under the head?
Yes, it is a hex washer head. The integral washer runs 0.384 to 0.414 in. outside diameter with a thickness of 0.019 to 0.031 in., and the head height is 0.105 to 0.12 in. That washer face spreads the clamp load, so you don't need a separate washer when fastening through sheet metal or a bracket slot.
5) Can I use zinc plated tapping screws outdoors or in a damp mechanical room?
Zinc plated steel is a mild corrosion finish, fine for dry interior work, electrical boxes, panels, strut, and conditioned mechanical spaces. For sustained exterior exposure, washdown areas, or anywhere near coastal salt air, specify stainless or a heavier coating instead. The JDSP182 is steel with a zinc finish.
6) How are Metallics JDSP182 screws packaged and what is the smallest quantity I can order?
They ship in a jar of 100. Minimum order is 100 count, so you are buying by the jar rather than loose pieces. Jar weight is 0.75 lbs.
7) Do these screws meet a published dimensional standard for a spec submittal?
Yes. The JDSP182 is built to ASME B18.6.3-2013 for dimensions and ASME B18.6.4 for the thread, with material per AISI 1016-1024. One caveat worth knowing if you order across the Metallics JDSP range: dimensions for the #9 diameter are independent of ASME B18.6.4. The #10 x 1 in. is covered.
How fast can I get the Metallics JDSP182 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JDSP182 come with a warranty?
Absolutely. The Metallics JDSP182 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JDSP182?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JDSP182 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!