Metallics TEKD1310M 10 x 1 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.14
$0.14
Metallics TEKD1310M 10 x 1 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - Steel Zinc - 10000qty

Metallics TEKD1310M 10 x 1 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: TEKD1310M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.14
$0.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - Steel Zinc - 10000qty

  • Additional Notes

    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

  • Features

    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
    • #3 Drill Point
    • 5/16 Indented Hex Head with Hex Drive
    • 10 Diameter, 1" Length
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
10000 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#3
Drive Type:
Hex
Fastener Head Height:
0.105 - 0.12 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.305 - 0.312 in.
Fastener Length:
1
Hardness:
Rockwell C32-40
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
Order Minimum Imperial:
10000
Order Minimum Uom Imperial:
TH
Pack Type:
Box
Panel Thickness:
0.110 - 0.175 IN
Product Group:
Fasteners
Product Height:
6.13 in
Product Length:
9 in
Product Weight:
75 lbs
Product Width:
9 in
Remarks:
The catalog UPC differ from the tarnsaction daat spreadsheet UPC
Screw Point Type:
Drill Point
Slot Depth:
0.057 - 0.072
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Thread Per Inch:
16
Thread Standard:
SAE J78 - 2013
Torsional Strength:
61 lb-in minimum
Washer Od:
0.384 - 0.414 in.
Washer Thickness:
0.019 - 0.031 IN
Width Across Corners:
0.34
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEKD
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics TEKD1310M – Frequently Asked Questions

1) What is the minimum order quantity on these Metallics self-drilling screws?
They ship in a box of 10,000 pieces, which is the order minimum. That is a jobsite or shop stocking quantity, not a handful, so plan on it being a bulk buy for a crew running conduit strap, hangers or sheet metal all week.
2) Do these Metallics drill screws qualify for Buy American or ARRA jobs?
The TEKD1310M is flagged both ARRA compliant and Buy American compliant in the manufacturer data, which is what most federal and institutional specs are checking for. Country of origin is listed as multiple, so confirm the origin marking on the box your order arrives in if your submittal requires a single named country.
3) What size nut driver do I need for a Metallics TEKD1310M hex head screw?
A 5/16 in. nut driver or socket. The head is an indented hex measuring 0.305 to 0.312 in. across the flats, 0.34 in. across corners, with a head height of 0.105 to 0.12 in. Standard hex drive, so any screw gun with a 5/16 magnetic driver runs them.
4) Does the TEKD1310M come with the washer already on it, and how big is it?
The washer is part of the screw, an integral hex washer head, so there is nothing separate to install. Washer outside diameter runs 0.384 to 0.414 in. with a thickness of 0.019 to 0.031 in. That bearing surface is what lets it hold strap, clip and conduit hanger material without pulling through.
5) Will a #10-16 self-drilling screw strip out before it seats in steel?
Minimum torsional strength on the #10 x 1 in. Metallics drill screw is 61 lb-in, with the fastener hardened to Rockwell C32-40. Set your gun clutch below that and back off the trigger once the washer seats. Over-spinning after seating is what snaps heads, not the torque rating.
6) What thread count is a #10 Tek screw, and will it match my existing fasteners?
16 threads per inch, the #10-16 coarse drill screw thread made to SAE J78-2013, with head dimensions to ASME B18.6.3-2010. If the screws already in your panels are #10-16 hex washer head, these are the same thread and the same 5/16 drive.
7) Are these zinc screws okay for outdoor or damp locations?
Material is carbon steel to AISI 1016-1024 with a zinc plated finish. Zinc plating is a mild indoor corrosion coating. It is fine for interior structure, mechanical rooms and dry service areas, but for exterior, coastal or wet locations you want a stainless or coated-exterior drill screw instead.
8) How long does it take to drill one of these through sheet steel?
Metallics rates drill time at 2.5 seconds through a 1 mm plate. Minimum torque values are the same for the steel and the stainless versions of these self-drill screws, so switching materials does not change how you set the gun.
How fast can I get the Metallics TEKD1310M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TEKD1310M come with a warranty?
Absolutely. The Metallics TEKD1310M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TEKD1310M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TEKD1310M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!