Metallics JDS182SS 10 x 1 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.53
$0.63
Metallics JDS182SS 10 x 1 in. 5/16 Indented Hex Head Slotted Sharp Point Tapping Screws - 18-8 Stainless - 100qty

Metallics JDS182SS 10 x 1 in. 5/16 Indented Hex Head Slotted Sharp Point Tapping Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JDS182SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.53
$0.63
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1 in. 5/16 Indented Hex Head Slotted Sharp Point Tapping Screws - 18-8 Stainless - 100qty

  • Features

    • Fastening stainless steel parts to aluminum or steel can cause a type of corrosion known as a galvanic couple in some environments.
    • 10 Diameter, 1" Length
    • 18-8 Stainless Material
    • Hex 5/16 Head with slotted Drive

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Hex/Slotted
Fastener Head Height:
0.105 - 0.12 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.305 - 0.312 in.
Fastener Length:
1
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
RockweII C28-38
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Indent_Hex_Head_Slot_TS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
1.15 lbs
Product Width:
3 in
Screw Point Type:
Gimlet Point
Slot Depth:
0.057 - 0.072
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Thread Per Inch:
12
Thread Standard:
ASME B18.6.4
Washer Od:
0.384 - 0.414 in.
Washer Thickness:
0.019 - 0.031 IN
Width Across Corners:
0.34
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JDS
Product Details:
Type A Tapping Screw
Product Material:
18-8 Stainless

Metallics JDS182SS – Frequently Asked Questions

1) Can I use these 18-8 stainless screws on aluminum or steel without corrosion problems?
Watch it. Fastening 18-8 stainless parts to aluminum or steel can set up a galvanic couple in some environments, which corrodes the lesser metal around the fastener. Outdoors, in damp mechanical rooms, or in coastal air, that matters. Dry indoor electrical work is where these get used most, and the stainless resists rust where a plated carbon steel screw would bleed.
2) Are these screws Buy American or ARRA compliant for a public works job?
No. The Metallics JDS182SS is not Buy American compliant and is not ARRA compliant; country of origin is listed as multiple. If your project carries domestic sourcing requirements, this part will not satisfy them.
3) Do I need to drill a pilot hole for a #10 Type A sharp point tapping screw?
A Type A tapping screw with a gimlet (sharp) point is made to start in thin sheet metal and form its own thread, so a pilot hole is not always required in light gauge stock. In heavier sheet or when you want to avoid dimpling, a pilot sized for a #10 with 12 threads per inch keeps the thread from stripping. Type A is a sheet metal screw, not a thread cutting screw for thick plate.
4) Is the JDS182SS sold loose or do I have to buy a full pack?
These ship as a jar of 100, which is the order minimum on the Metallics JDS182SS. If you only need a handful for one panel, the jar is still the buying unit.
5) Does the JDS182SS have a built-in washer under the head?
Yes, the indented hex head carries an integral washer face with an outside diameter of 0.384 to 0.414 inch and a thickness of 0.019 to 0.031 inch. That gives a wider bearing surface than a plain hex head, which helps when you are pulling down on a sheet metal flange or a thin box wall and do not want the head to pull through.
6) What standards do these Metallics tapping screws meet for head and thread dimensions?
Head geometry on the JDS182SS follows ASME B18.6.3-2010 and the thread follows ASME B18.6.4. That means a submittal calling for a standard #10 Type A tapping screw will take this part. Note that dimensions for #9 diameter screws in this family are independent of ASME B18.6.4.
7) How hard is an 18-8 stainless tapping screw, and will it thread into steel studs or strut?
Hardness runs Rockwell C28-38. That is enough to form threads in light gauge sheet, but stainless tapping screws are softer than case hardened carbon steel self-drillers, so driving into heavy structural steel or thick strut risks twisting the head off. For light gauge sheet metal, boxes, and duct, the 1 inch length with 12 threads per inch does the job.
8) How much does a jar of 100 of these #10 x 1 inch stainless screws weigh?
A jar runs 1.15 lbs, with the container measuring 3 x 2.15 x 3 inches. Useful if you are kitting out service vans or counting weight on a shipment of multiple jars.
How fast can I get the Metallics JDS182SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JDS182SS come with a warranty?
Absolutely. The Metallics JDS182SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JDS182SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JDS182SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!