Minerallac 10 x 1" Pan Head Sheet Metal Screws with Phillips/Slotted Combo Drive, Zinc Plated Steel
Professional Fastening Solutions for Sheet Metal Applications
Minerallac delivers reliable fastening performance with these 10 x 1" pan head sheet metal screws, featuring zinc plated steel construction and versatile Phillips/slotted combo drive design. These Type-A thread screws provide secure attachment for sheet metal applications with professional-grade durability and corrosion resistance.
Professional Features & Benefits
- 10 x 1" Size: Optimal length and diameter for secure sheet metal fastening applications
- Pan Head Design: 0.373" head width provides excellent bearing surface and professional appearance
- Phillips/Slotted Combo Drive: Dual drive options offer installation flexibility with #2 driver size compatibility
- Zinc Plated Finish: Corrosion-resistant coating extends service life in various environmental conditions
- Steel Construction: Durable material provides reliable holding power and structural integrity
- Type-A Thread: Self-tapping design creates secure threads in sheet metal without pre-drilling
Technical Specifications
- Country Of Origin: China
- Drive Type: Phillips/Slotted Combo
- Driver Size: #2
- Head Color: Silver
- Head Height: 0.133
- Head Type: Pan Head
- Head Width: 0.373
- Product Finish: Zinc Plated
- Product Length: 1 in
- Product Material: Steel
- Product Size: 10 x 1
- Product Type: Sheet Metal Screw
- Thread Size: 12
- Thread Type: Type-A
Installation & Operation
- Select appropriate drill bit size for pilot hole if required based on material thickness and type.
- Position screw at desired fastening location ensuring proper alignment with mating surfaces.
- Use #2 Phillips or slotted driver to begin threading the screw into the sheet metal material.
- Apply steady downward pressure while turning to allow Type-A threads to cut into the material.
- Continue driving until pan head sits flush against the surface without over-tightening.
- Verify secure attachment and proper seating for optimal holding power and appearance.
Professional Applications
- HVAC ductwork assembly and repair
- Electrical enclosure and panel mounting
- Metal roofing and siding installation
- Industrial equipment housing attachment
- Commercial building maintenance
- Automotive body panel fastening
- General sheet metal fabrication
Why Choose Minerallac Quality?
Minerallac sheet metal screws combine reliable steel construction with zinc plated corrosion protection, delivering consistent performance in demanding fastening applications. The precision-engineered pan head design and combo drive system provide professional installation flexibility while maintaining secure, long-lasting connections.
Manufacturer Resources
Product Specs
- Drive Type:
- Phillips/Slotted Combo
- Driver Size:
- #2
- Head Color:
- Silver
- Head Height:
- 0.133
- Head Type:
- Pan Head
- Head Width:
- 0.373
- Product Finish:
- Zinc Plated
- Product Length:
- 1 in
- Product Material:
- Steel
- Product Size:
- 10 x 1
- Product Type:
- Sheet Metal Screw
- Thread Size:
- 12
- Thread Type:
- Type-A
- Department:
- Electrical
- Product Subgroup:
- Self-Tapping Screws
- Product Group:
- Hangers, Supports & Fasteners
Minerallac 19017J – Frequently Asked Questions
1) Do I need to pre-drill for the Minerallac 19017J sheet metal screws?
These are Type-A thread self-tapping screws, so they cut their own threads in sheet metal without a pilot hole in thinner gauges. On heavier or harder stock, a pilot hole sized to the material still makes sense. Drive them with steady downward pressure until the pan head seats flush, and stop there rather than over-torquing, which strips the thread the screw just cut.
2) What driver do I need for Minerallac 19017J pan head screws?
A #2 driver. The head takes a combination Phillips/slotted drive, so either a #2 Phillips bit or a flat blade works. The combo slot is useful on service calls where you are reaching into an enclosure and only have one screwdriver on the belt.
3) Will a 1 inch sheet metal screw hold in HVAC duct and electrical enclosures?
Yes. At 1 inch long these work for duct assembly and repair, mounting electrical panels and enclosures, metal roofing and siding, and general sheet metal fabrication. The 1 inch length gives you thread engagement through two layers of light gauge plus a standoff; for sheet-to-sheet seams only, a shorter screw leaves less protruding point inside the duct.
4) How much bearing surface does the pan head give, and will it sit proud of the surface?
The pan head measures 0.373 inch across with a head height of 0.133 inch, so it bears on a wide footprint and sits above the surface rather than countersinking. That is what you want for clamping thin sheet or a bracket flange, but if you need a flush face, a flat head screw is the wrong-to-right swap here.
5) Are zinc plated steel screws okay for outdoor or damp locations?
The screws are steel with a zinc plated finish, which handles general indoor and sheltered conditions and resists the humidity you get in mechanical rooms and duct runs. Zinc plating is a sacrificial coating, not stainless, so for direct coastal exposure or continuous wet service you should move to a stainless fastener instead.
6) Which Minerallac part number is the 10 x 1 inch pan head sheet metal screw?
Minerallac 19017J, a 10 x 1 inch pan head sheet metal screw in zinc plated steel with a Phillips/slotted combo drive. Head color is silver, matching the plating.
How fast can I get the Minerallac 19017J delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Minerallac 19017J come with a warranty?
Absolutely. The Minerallac 19017J is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Minerallac 19017J?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Minerallac 19017J from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.