Metallics JTEK4PSS 10 x 1/2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JTEK4PSS 10 x 1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - 410 Stainless Steel - 100qty

Metallics JTEK4PSS 10 x 1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - 410 Stainless Steel - Each

(No reviews yet) Write a Review

Model: JTEK4PSS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - 410 Stainless Steel - 100qty

  • Features

    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
    • Pan Head with Phillips Drive
    • 410 Stainless Steel Material
    • #2 Drill Point
    • 10 Diameter, 1/2" Length

  • Additional Notes

    • Other sizes and quantities available by request | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
2-Jan
Hardness:
Rockwell C38-46
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Hd_Phil_Self-Drill_TS_Steel_and_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Panel Thickness:
0.035 - 0.110 IN
Phillips Recess Diameter:
0.192
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.47 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.089 - 0.113
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Thread Per Inch:
16
Thread Standard:
SAE J78 - 2013
Torsional Strength:
61 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEK
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
410 Stainless Steel

Metallics JTEK4PSS – Frequently Asked Questions

1) Is a 1/2 inch long self-drilling screw long enough for my application?
At 1/2 inch, the JTEK4PSS is sized for thin-gauge, single-layer work: fastening to panel 0.035 to 0.110 inch thick with a strap or clip under the head. The drill flutes at the tip consume part of that length, so once you stack two layers of heavier sheet or anything with standoff, go to a longer screw in the same series.
2) Will 410 stainless self-drilling screws drill as well as plain steel ones?
Yes. The data on these 410 stainless screws states minimum torques are the same for stainless and steel self-drill screws, with a drill time of 2.5 seconds through a 1 mm plate. Minimum torsional strength is 61 lb-in and the screws run Rockwell C38-46, which is what lets a stainless screw cut its own hole instead of work-hardening and snapping.
3) Is 410 stainless corrosion resistant enough for outdoor or damp electrical work?
410 is a hardenable martensitic stainless, which is why it can be made into a self-drilling screw at Rockwell C38-46. It resists corrosion far better than plain carbon steel, so it suits damp interiors, mechanical rooms, and covered exterior work. It is not the choice for coastal salt spray or chemical exposure, where 300-series or a coated screw is the better call.
4) What driver bit do I need for the JTEK4PSS screws?
A #2 Phillips bit. The recess is a Phillips drive with a 0.192 inch recess diameter and a gaging depth of 0.089 to 0.113 inch, so a worn or oversized bit will cam out and strip the head. Keep a fresh #2 in the gun.
5) Do these Metallics screws meet Buy American and ARRA requirements for a public job?
The JTEK4PSS is flagged compliant for both Buy American and ARRA. Country of origin is listed as multiple, so confirm the origin marking on the jar you receive if your specification requires documentation of a single source country.
6) Will a pan head screw sit flat enough for mounting straps and brackets?
Pan head, with a head width of 0.357 to 0.373 inch and head height of 0.122 to 0.133 inch. That gives a broad flat bearing surface that clamps straps, clips, panels, and bracket flanges against sheet metal without pulling through. It is not a countersinking head, so it stands proud of the surface. Use a flat or oval head where you need the fastener flush.
7) What thread pitch and standards do the Metallics JTEK #10 self-drilling screws follow?
16 threads per inch on a #10 diameter, built to SAE J78-2013 for the thread and drill screw form and ASME B18.6.3-2010 for head dimensions. It is a Type BSD self-drilling and tapping screw, meaning it drills its own pilot and forms its own thread in one pass, so no pre-drilling.
8) How many Metallics JTEK4PSS screws come in a pack and how are they supplied?
They ship in a jar, with an order minimum of 100 count. Total package weight is 0.47 lbs.
How fast can I get the Metallics JTEK4PSS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEK4PSS come with a warranty?
Absolutely. The Metallics JTEK4PSS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEK4PSS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEK4PSS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!