Metallics JFW139 10 x 2 in. Fl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.31
$0.31
Metallics JFW139 10 x 2 in. Flat Head Slotted Wood Screws - Steel Zinc - 100qty

Metallics JFW139 10 x 2 in. Flat Head Slotted Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFW139
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.31
$0.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 2 in. Flat Head Slotted Wood Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Steel Zinc Material
    • 10 Diameter, 2" Length
    • Flat Head with Slotted Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.116 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.34 - 0.385 in.
Fastener Length:
2
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.22 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Slot Depth:
0.034 - 0.053
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Thread Per Inch:
13
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFW
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFW139 – Frequently Asked Questions

1) Will a #10 x 2 in. flat head screw sit flush in a countersunk hole?
Yes, that is what the flat head is for. Head width on the JFW139 runs 0.34 to 0.385 inch with a head height of 0.116 inch, so it seats flush in a standard countersink for a #10 screw. If your existing hole was drilled for an oval or round head, you will need to countersink it.
2) Can I use a Phillips bit on these, or do I need a flat blade?
Slotted drive only. The JFW139 takes a straight flat-blade screwdriver or a slotted power bit sized to a 0.05 to 0.06 inch slot width with 0.034 to 0.053 inch slot depth. A Phillips or square bit will not engage. If your crew is driving these with impact drivers, slotted is slow going and cam-out prone, so a Phillips or square drive wood screw is the better pick for volume work.
3) Are these zinc wood screws OK for outdoor or damp locations?
These are steel with a zinc finish, which is an indoor corrosion coating. Fine for interior framing, blocking, box mounting, and trim. For exterior exposure, pressure-treated lumber, or wet locations, step up to hot-dip galvanized or stainless instead; zinc-plated steel will rust out.
4) Do these wood screws meet a dimensional standard for spec work?
The JFW139 is made to ASME B18.6.1, with threads to ASME B18.6.1-1997. That is the governing standard for wood screws, so head diameter, head height, slot geometry, and thread form are all to spec if your drawing calls out B18.6.1.
5) Are these screws Buy American or ARRA compliant for a government job?
The JFW139 carries ARRA and Buy American compliance flags of C, with country of origin China. If your contract requires domestic melt and manufacture, confirm which compliance basis your specification accepts before you commit these to the job.
6) Why is a wood screw filed under electrical supplies?
The JFW139 is a standard wood screw, cataloged by Metallics for the electrical trade because it is the fastener electricians reach for to hang boxes, straps, and devices to wood studs and blocking. Nothing about the screw is electrical-specific, it is plain zinc-plated steel with a flat head and slotted drive, so carpenters and maintenance crews use the same jar.
7) What is the exact part number if I need to reorder these screws?
Order Metallics JFW139, the #10 x 2 inch flat head slotted wood screw in zinc-plated steel, from the JFW wood screw series. Other diameters, lengths, and pack quantities in the same series are available by request.
How fast can I get the Metallics JFW139 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFW139 come with a warranty?
Absolutely. The Metallics JFW139 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFW139?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFW139 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!