Metallics JGDS6 10 x 3-1/2 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.63
$0.63
Metallics JGDS6 10 x 3-1/2 in. Flat Head Phillips Deck Screws - Steel Yellow Zinc - Coarse Threads - 100qty

Metallics JGDS6 10 x 3-1/2 in. Flat Head Phillips Deck Screws - Steel Yellow Zinc - Coarse Threads - Each

(No reviews yet) Write a Review

Model: JGDS6
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.63
$0.63
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 3-1/2 in. Flat Head Phillips Deck Screws - Steel Yellow Zinc - Coarse Threads - 100qty

  • Features

    • Coarse Threads
    • Steel Yellow Zinc Material
    • 10 Diameter, 3-1/2" Length
    • Flat Head with Phillips Drive

  • Additional Notes

    • Bit Not Included | other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Type:
Flat
Fastener Length:
3/1/02
Field Application:
All Weather Wood Application, Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
1.88 lbs
Product Width:
3.5 in
Sub Division:
Electrical-E H2
Thread Spacing:
Coarse
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Deck Screw
Type2:
Deck Screw
Series:
JGDS
Product Finish:
Yellow Zinc Dichromate
Product Details:
Deck Screw
Product Material:
Steel Yellow Zinc

Metallics JGDS6 – Frequently Asked Questions

1) What size and length are the Metallics JGDS6 deck screws?
The JGDS6 is a #10 diameter screw, 3-1/2 inches long, with a flat head and a Phillips drive. Threads are coarse, UNC form, which is what you want biting into wood rather than metal.
2) Are Metallics JGDS6 deck screws OK for outdoor or exposed wood work?
Yes. The JGDS6 is steel with a yellow zinc dichromate finish and is specified for all-weather wood applications, along with electrical, plumbing, and HVAC work. That coating gives corrosion resistance for exterior framing, decking, and blocking, though it is a plated steel screw rather than stainless.
3) Are Metallics JGDS6 screws Buy American or ARRA compliant for a government job?
No. The JGDS6 is not Buy American compliant and is not ARRA compliant, with multiple countries of origin. If your contract carries a domestic-sourcing clause, this screw will not satisfy it.
4) How many Metallics JGDS6 screws come in a jar, and is there a minimum order?
They ship in a jar of 100, and 100 is the order minimum. Other sizes and quantities are available by request.
5) Does the JGDS6 deck screw come with a driver bit?
No bit is included. You will need your own #2 Phillips bit, since the JGDS6 uses a Phillips drive recess.
6) Will a flat head deck screw sit flush in wood, or do I need to countersink?
The JGDS6 has a flat head, which is the countersinking profile, so it pulls itself flush into softwood without a pre-drilled countersink. In hardwood or near the end of a board, pre-drilling still helps avoid splitting at 3-1/2 inches of length.
7) Can electricians use these Metallics deck screws for mounting backer boards and strut blocking?
Yes, that is one of the stated uses. The JGDS6 is listed for electrical, plumbing, and heating and air conditioning work as well as all-weather wood. At #10 by 3-1/2 inches it reaches through a plywood backer board and well into studs or blocking behind it.
8) Coarse thread or fine thread for deck and framing lumber?
Coarse is the right call for wood, and the JGDS6 is a coarse UNC thread. The wider thread pitch grabs more fiber per turn in softwood and pressure-treated lumber; fine threads are for metal and dense material and tend to strip in wood.
9) How much does a jar of 100 JGDS6 deck screws weigh?
About 1.88 lbs per jar. Useful if you are planning a bulk pull or checking pack-out weight on a truck order.
How fast can I get the Metallics JGDS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JGDS6 come with a warranty?
Absolutely. The Metallics JGDS6 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JGDS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JGDS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!