You may also like
Metallics JTEK3PV 10 x 3/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - Each
Model: MET-JTEK3PV
10 x 3/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 500qty
Features
#2 Drill Point
Steel Zinc Material
Pan Head with Phillips Drive
10 Diameter, 3/4"...
Metallics
$50.26
$0.26
10 x 3/4 Flat head Philips Self Drilling Screw #2 tip St-Zn
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JTEKDF3 – Frequently Asked Questions
1) Do I need to pre-drill a pilot hole for the JTEKDF3 screw?
No. The JTEKDF3 is a self drilling screw, so the point cuts its own hole as you drive it, with no pilot drilling step. That is what makes it quick for fastening into sheet metal, light gauge steel studs and metal enclosures.
2) What driver bit does the Metallics JTEKDF3 screw take?
A #2 Phillips bit. The screw is called out with a #2 tip, which is the common recess size on #8 through #10 Phillips fasteners. Using a #1 or #3 bit will cam out and chew the recess, especially when the point is drilling its own hole under load.
3) Is the JTEKDF3 screw okay for outdoor or damp locations?
It is a zinc plated steel screw, which is a dry indoor finish. Zinc plating handles incidental moisture and indoor humidity, but for exterior work, wet locations or coastal air you want stainless or a coated exterior rated fastener instead. Keep the JTEKDF3 for interior electrical work: boxes, enclosures, straps and light gauge framing.
4) Will a 3/4 inch self drilling screw be long enough for my application?
At 3/4 inch overall, the JTEKDF3 gives you only a short grip once the drill point and the material thickness are accounted for, so it suits attaching thin items, straps, plates and enclosure parts to sheet metal or light gauge steel. If you are going through a thicker stack or need to clear a stud flange plus a bracket, step up to a longer screw in the same series.
5) What is the exact part number to order this Metallics flat head self drilling screw?
Order it as Metallics JTEKDF3. That single part number covers the #10 x 3/4 inch flat head Phillips self drilling screw in steel zinc; there are no finish or size options to specify alongside it.
How fast can I get the Metallics JTEKDF3 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKDF3 come with a warranty?
Absolutely. The Metallics JTEKDF3 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKDF3?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKDF3 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.