Metallics JTEKD6M 10 x 3/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.24
$0.24
Metallics JTEKD6M 10 x 3/4 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 1000qty

Metallics JTEKD6M 10 x 3/4 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEKD6M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.24
$0.24
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 3/4 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 1000qty

  • Additional Notes

    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

  • Features

    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
    • #2 Drill Point
    • Steel Zinc Material
    • 10 Diameter, 3/4" Length
    • 5/16 Indented Hex Head with Hex Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
1000 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Hex
Fastener Head Color:
Silver
Fastener Head Height:
0.105 - 0.12 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.305 - 0.312 in.
Fastener Length:
4-Mar
Hardness:
Rockwell C32-40
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
Order Minimum Imperial:
1000
Order Minimum Uom Imperial:
TH
Pack Type:
Jar
Panel Thickness:
0.035 - 0.110 IN
Product Group:
Fasteners
Product Height:
7.25 in
Product Length:
4.5 in
Product Weight:
6.5 lbs
Product Width:
4.5 in
Remarks:
The catalog UPC differ from the tarnsaction daat spreadsheet UPC
Screw Point Type:
Drill Point
Slot Depth:
0.057 - 0.072
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Thread Per Inch:
16
Thread Standard:
SAE J78 - 2013
Thread Type:
UNC
Torsional Strength:
61 lb-in minimum
Washer Od:
0.384 - 0.414 in.
Washer Thickness:
0.019 - 0.031 IN
Width Across Corners:
0.34
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEKD
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEKD6M – Frequently Asked Questions

1) What metal thickness can the Metallics JTEKD6M self-drilling screw drill through?
The JTEKD6M is rated for panel thickness of 0.035 to 0.110 inch. That covers typical light-gauge steel studs, strut, and sheet metal enclosures. Go thicker than 0.110 inch and the #2 drill point will not reliably cut through, so step up to a heavier drill point screw for structural steel.
2) Do I need to pre-drill a pilot hole for these #10 hex head screws?
No pilot hole needed. The JTEKD6M is a Type BSD self-drilling and tapping screw with a #2 drill point, so it cuts its own hole and forms its own thread in one pass. The listed drill time is 2.5 seconds through a 1 mm thick plate.
3) Do these Metallics screws meet Buy American and ARRA requirements for a federal or public job?
The JTEKD6M is flagged compliant for both ARRA and Buy American, which is what a government, school, or healthcare procurement file usually needs on fasteners. Country of origin is listed as multiple.
4) Is the washer built into these screws or separate?
It is integral to the head, not a loose part. The bonded washer runs 0.384 to 0.414 inch outside diameter and 0.019 to 0.031 inch thick, which spreads load over the hole in thin sheet and keeps the head from pulling through light gauge panel. Nothing to assemble or lose on the job.
5) Are these #10 self-drilling screws OK for outdoor or damp locations?
These are steel with a zinc finish, which is a corrosion-resistant plating suited to dry interior and protected locations. For sustained exterior exposure, wet conditions, or coastal work, specify a stainless self-drilling screw instead. The base steel is AISI 1016 to 1024 with a case hardness of Rockwell C32-40.
6) How many Metallics JTEKD6M screws come in a pack, and how are they packaged?
They ship in a jar with an order minimum of 1,000 pieces. Plan quantities in thousands rather than by the handful.
7) What thread does a #10 JTEKD6M screw have, and will a standard #10-16 nut thread onto it?
The thread is 16 threads per inch in UNC form, so it is a #10-16 self-tapping thread rather than a machine-screw #10-24 or #10-32. A standard #10-24 or #10-32 nut will not match it. These are meant to tap their own thread in sheet metal, not to be run into a nut.
8) What standards do these self-drilling tapping screws conform to?
Dimensionally the JTEKD6M follows ASME B18.6.3-2010, and the thread conforms to SAE J78-2013. Worth noting for spec writers: SAE J78 does not cover #7 diameter drill screws, so if a drawing calls out a #7, it is outside that standard.
9) How much torque can I put on a #10 self-drilling screw before it snaps?
Minimum torsional strength is 61 lb-in. Set your impact or screw gun clutch below that; driving hard past seating is what shears the head off a drill screw in thin gauge. The same minimum torque figures apply to stainless and steel self-drill screws.
How fast can I get the Metallics JTEKD6M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKD6M come with a warranty?
Absolutely. The Metallics JTEKD6M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKD6M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKD6M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!