Metallics TEKD65M 10 x 3/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.24
$0.24
Metallics TEKD65M 10 x 3/4 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 5000qty

Metallics TEKD65M 10 x 3/4 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: TEKD65M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.24
$0.24
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 3/4 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 5000qty

  • Additional Notes

    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

  • Features

    • #2 Drill Point
    • Steel Zinc Material
    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
    • 10 Diameter, 3/4" Length
    • 5/16 Indented Hex Head with Hex Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
5000 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Hex
Fastener Head Height:
0.105 - 0.12 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.305 - 0.312 in.
Fastener Length:
4-Mar
Hardness:
Rockwell C32-40
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
Order Minimum Imperial:
5000
Order Minimum Uom Imperial:
TH
Pack Type:
Box
Panel Thickness:
0.035 - 0.110 IN
Product Group:
Fasteners
Product Height:
8.5 in
Product Length:
8.12 in
Product Weight:
29.78 lbs
Product Width:
6.37 in
Remarks:
The catalog UPC differ from the tarnsaction daat spreadsheet UPC
Screw Point Type:
Drill Point
Slot Depth:
0.057 - 0.072
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Thread Per Inch:
16
Thread Standard:
SAE J78 - 2013
Torsional Strength:
61 lb-in minimum
Washer Od:
0.384 - 0.414 in.
Washer Thickness:
0.019 - 0.031 IN
Width Across Corners:
0.34
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEKD
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics TEKD65M – Frequently Asked Questions

1) How thick a steel panel can the Metallics TEKD65M #10 self-drilling screw drill through?
The TEKD65M is rated for panel thicknesses of 0.035 to 0.110 inch, which covers typical light-gauge steel studs, strut, and sheet metal. The #2 drill point does the drilling and the thread taps in one pass, so no pilot hole is needed within that range. Heavier structural steel is outside what this screw will drill.
2) Is the Metallics TEKD65M screw sold individually or only by the box?
It ships as a box with a 5,000 piece order minimum, so it is a bulk-buy item rather than a count-out-a-handful purchase. The shipping box is listed at 29.78 lbs. For crews doing repeat light-gauge steel work it standardizes one fastener across jobs; for a one-off repair the quantity is well past what you need.
3) Does the Metallics TEKD65M screw qualify for Buy American or ARRA projects?
Metallics lists the TEKD65M as both ARRA compliant and Buy American compliant, which is what a government, school district, or federally funded job needs on the submittal. Country of origin is recorded as multiple.
4) Does this Metallics screw come with a washer already on it, and how big is it?
Yes, the washer is integral to the head. Outside diameter is 0.384 to 0.414 inch with a thickness of 0.019 to 0.031 inch, which gives you more bearing surface than a plain hex head when fastening thin sheet or strap to light-gauge steel. No separate washer needs to be ordered.
5) Will a #10 x 3/4 in. zinc self-drilling screw hold up outdoors?
The TEKD65M is carbon steel with a zinc finish, which is an indoor and protected-application coating. It is a good match for electrical work inside a building, strut, boxes, and light-gauge framing. For sustained wet or exterior exposure, step up to a stainless or a heavier coated drill screw instead.
6) What thread pitch and standards does the Metallics TEKD65M meet?
16 threads per inch on a #10 diameter, 3/4 inch long screw. Threads follow SAE J78-2013, head dimensions follow ASME B18.6.3-2010, and the steel is AISI 1016-1024 case hardened to Rockwell C32-40. That is the data a spec writer or submittal reviewer is usually after on a drill screw.
7) How much driving torque will this self-drilling screw take before it snaps?
Minimum torsional strength is 61 lb-in. That is the number to watch if you are driving with a high-torque impact rather than a clutch screwgun, since over-driving past that point shears the screw rather than seating it. Expect roughly 2.5 seconds of drill time through a 1 mm plate.
How fast can I get the Metallics TEKD65M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TEKD65M come with a warranty?
Absolutely. The Metallics TEKD65M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TEKD65M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TEKD65M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!