Metallics RDS6M 10 x 4 in. Bug...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,928.57
Metallics RDS6M 10 x 4 in. Bugle Head Square Drive Deck Screws - All-Weather - Type 17 - Coarse Threads - 1000qty

Metallics RDS6M 10 x 4 in. Bugle Head Square Drive Deck Screws - All-Weather - Type 17 - Coarse Threads - Each

(No reviews yet) Write a Review

Model: RDS6M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,928.57
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 4 in. Bugle Head Square Drive Deck Screws - All-Weather - Type 17 - Coarse Threads - 1000qty

  • Additional Notes

    • Other sizes and quantities available by request | In the absence of a single industry standard for Bugle Head Deck Screws, these dimensions are offered as a guide; slight deviations are acceptable.

  • Features

    • Bugle Head with Square Drive
    • All-Weather Coating
    • Includes 3 Free Power Bits
    • Screws have a green ceramic coating intended to withstand a salt-spray test of 500 hours.
    • 10 Diameter, 4" Length

  • Kit Components

    • #1 Drive Power Bit

Manufacturer Resources

Product Specs

Minimum Purchase:
1000 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Square
Driver Size:
#2
Fastener Head Height:
0.020 - 0.039 in.
Fastener Head Type:
Bugle
Fastener Head Width:
0.334 - 0.363 in.
Fastener Length:
4
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Material Standard:
AISI 1080
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Bugle_Hd_Phil_Coarse_Thrd_Deck_Scr_All_Wthr.pdf
Order Minimum Imperial:
1000
Order Minimum Uom Imperial:
TH
Pack Type:
Box
Product Group:
Fasteners
Product Height:
6.13 in
Product Length:
9 in
Product Weight:
18.18 lbs
Product Width:
9 in
Screw Point Type:
Type 17
Square Recess Depth:
0.064 - 0.075
Square Recess Width:
0.110 - 0.113
Sub Division:
Electrical-E H2
Thread Per Inch:
8
Thread Spacing:
Coarse
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Deck Screw
Type2:
Deck Screw
Series:
RDS
Product Finish:
Zinc/All-Weather Coating
Product Details:
Deck Screw
Product Material:
All-Weather

Metallics RDS6M – Frequently Asked Questions

1) What driver bit do the Metallics RDS6M deck screws take, and is one included?
Square drive, #2 driver size. Three power bits ship with the box, so you can start driving without sourcing a bit separately. The recess measures 0.110 to 0.113 inches wide and 0.064 to 0.075 inches deep, which is why a #2 square bit seats properly and a Phillips will cam out.
2) How many RDS6M deck screws come in a box and can I buy less than a full box?
The RDS6M is sold by the box at a 1000-piece minimum, packaged weight 18.18 lbs. Smaller counts are not part of this item, though Metallics lists other sizes and quantities as available by request.
3) Will a 4 inch deck screw hold in exterior and treated lumber, or do I need stainless?
These are #10 by 4 inch screws with a green ceramic all-weather coating rated to withstand a 500-hour salt-spray test, over an AISI 1080 steel body, with a zinc/all-weather finish. That is built for exterior and damp exposure. For permanent submersion or direct coastal saltwater contact, stainless is still the usual call; for decking, framing fastening, and exterior MRO work, the coated version is what gets specified.
4) Do these Metallics screws qualify for Buy American and ARRA funded jobs?
Metallics lists the RDS6M as both ARRA compliant and Buy American compliant. Country of origin is recorded as multiple, so if a project requires documented origin for a specific shipment, request it against the lot you are buying.
5) What does the Type 17 point on these Metallics deck screws do?
Type 17 is a sharp point with an auger slot cut at the tip. It cuts its own pilot in wood, clears the chip, and cuts down on splitting when you drive near a board end or edge. Combined with 8 threads per inch coarse UNC threading, the screw pulls into softwood without pre-drilling in most cases.
6) Will the bugle head on the RDS6M sit flush, or does it need a countersink?
Bugle head, so the tapered underside self-countersinks in wood and finishes flush without a separate countersink step. Head width runs 0.334 to 0.363 inches with a head height of 0.020 to 0.039 inches, so it seats low rather than standing proud on a deck board or trim piece.
7) Is the RDS6M a square drive or Phillips deck screw? I standardized my crews on one bit.
RDS6M is the square drive version, #2 size. Metallics builds the same bugle head coarse thread all-weather deck screw in a Phillips head configuration as well, so if your crews are stocked on Phillips bits ask for that variant rather than mixing drives on one job.
How fast can I get the Metallics RDS6M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics RDS6M come with a warranty?
Absolutely. The Metallics RDS6M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics RDS6M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics RDS6M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!