Metallics QTEKD17M 10 x 5/8 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.43
$0.43
Metallics QTEKD17M 10 x 5/8 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 1000qty

Metallics QTEKD17M 10 x 5/8 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - Each

(No reviews yet) Write a Review

Model: QTEKD17M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.43
$0.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 5/8 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 1000qty

  • Features

    • #2 Drill Point
    • 10 Diameter, 5/8" Length
    • 5/16 Head with Quadrive Drive
    • Made in the USA
    • Domestic Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
1000 units
Division:
Electrical H1
Product Group:
Fasteners
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Domestic Steel Zinc

Metallics QTEKD17M – Frequently Asked Questions

1) Do I need to pre-drill a pilot hole for these Metallics screws?
No. The QTEKD17M is a self-drilling and tapping screw, so the drill point cuts its own hole and the threads form the mating thread as it goes. One pass with a driver, no pilot hole and no separate tapping step.
2) Are these Metallics self-drilling screws made in the USA for a Buy American job?
Yes. The QTEKD17M is domestic steel and made in the USA, which is what procurement officers on federal, state, and institutional work are asking about when they request domestic fasteners.
3) What driver or bit do I need for a Quadrive 5/16 head screw?
Two choices on the QTEKD17M head. It is a 5/16 inch hex washer head, so a 5/16 inch magnetic nut setter on an impact or screwgun is the usual way to run it. The Quadrive feature means the head also takes a square drive bit, which is useful when you are working overhead or into a corner where a nut setter will not seat.
4) Are these zinc-plated screws OK for outdoor or damp locations?
The QTEKD17M is domestic steel with zinc plating, which is a dry-location, interior-grade finish. It handles normal indoor humidity, but for exterior, wet, coastal, or treated-lumber contact you should specify a stainless or heavier coated fastener instead, since zinc plating on carbon steel will corrode in those conditions.
5) What is the Metallics part number for the 10 x 5/8 inch hex head self-drilling screw?
QTEKD17M is the Metallics part number: #10 diameter, 5/8 inch length, 5/16 inch head, Quadrive, #2 drill point, zinc-plated domestic steel.
How fast can I get the Metallics QTEKD17M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics QTEKD17M come with a warranty?
Absolutely. The Metallics QTEKD17M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics QTEKD17M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics QTEKD17M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!