Eaton 30.5 mm Heavy-Duty Illum...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$328.00
Eaton 30.5 mm Heavy-Duty Illuminated Two-Position Selector Switch

Eaton 30.5 mm Heavy-Duty Illuminated Two-Position Selector Switch

(No reviews yet) Write a Review

Model: 10250T597LRD2A-1X

In Stock (leaves warehouse same day if ordered before 3pm ET)

$328.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Eaton 30.5 mm Heavy-Duty Illuminated Two-Position Selector Switch

The Eaton 30.5 mm Heavy-Duty Illuminated Two-Position Selector Switch is a rugged, panel-mount control device built for demanding industrial environments. Featuring a 30.5 mm heavy-duty operator with a 40 mm illuminated unit, this two-position selector switch operates in a Pull: maintained mode with a 1 NO-1 NC contact configuration. Rated NEMA 3, 3R, 4, 4X, 12, 13 and UL Listed, it delivers dependable performance in wet, dusty, and washdown locations, with a full-voltage 120 VAC LED light unit and red actuator for clear visual identification.

Key Features

  • Heavy-Duty Type: 30.5 mm Heavy-Duty construction for demanding industrial control applications.
  • Illuminated Operator Size: 40 mm illuminated unit provides clear visibility of switch status.
  • Two-Position Operation: Number of positions: 2, with a Pull: maintained operating mode for reliable manual control.
  • Contact Configuration: 1 NO-1 NC contact arrangement supports flexible circuit control wiring.
  • LED Illumination: Light unit type is LED, full voltage, with light unit voltage and lamp voltage rated 120 VAC for consistent brightness.
  • Red Actuator: Standard actuator finished in red for fast visual recognition on the panel.
  • Plastic Bus Material: Plastic bus construction supports the switch's electrical connections.
  • Environmental Rating: NEMA 3, 3R, 4, 4X, 12, 13 rated for indoor, outdoor, and washdown-duty environments.

Certifications & Compliance

  • UL Listed
  • CE Marked
  • NEMA 3, 3R, 4, 4X, 12, 13 Rated

Technical Specifications

  • Product Type: Electrical Component
  • Number of positions: 2
  • Actuator color: Red
  • Warranty: 1 year
  • Series: 10250T
  • Operating mode: Pull: maintained
  • Contact configuration: 1 NO-1 NC
  • Bus material: Plastic
  • Light unit voltage: 120 Vac
  • Lamp voltage - min: 120 VAC
  • Lamp voltage - max: 120 VAC
  • Light unit type: LED, full voltage
  • Actuator: Standard
  • Product Width: 1 in
  • Product Length/Depth: 1 in
  • Product Height: 1 in

Typical Applications

  • Industrial Control Panels
  • Heavy-Duty Machine Operator Stations
  • Outdoor and Washdown Equipment Enclosures
  • Manufacturing and Process Control Systems
  • Panel-Mount Selector Switch Retrofits

Why Eaton?

Eaton's 10250T Series 30.5 mm Heavy-Duty Illuminated Two-Position Selector Switch combines UL Listed and CE Marked construction with a NEMA 3, 3R, 4, 4X, 12, 13 rating, making it a trusted choice for professional electrical and industrial control installations. The plastic bus material, 1 NO-1 NC contact configuration, and full-voltage LED illumination reflect Eaton's commitment to reliable, code-compliant components backed by a 1-year warranty.

Manufacturer Resources

Product Specs

Light unit voltage:
120 Vac
Illumination:
Illuminated
Product Width:
1 in
Performance Rating:
NEMA 3R
Lamp voltage - min:
120 VAC
Product Size:
40 mm
Product Length/Depth:
1 in
Number of positions:
2
Product Height:
1 in
Light unit type:
LED, full voltage
Product Type:
Selector Switch
Actuator color:
Red
Warranty:
1 year
Catalog Notes:
Assembled at Factory
Operating mode:
Pull: maintained
Series:
10250T
Contact configuration:
1 NO-1 NC
Bus material:
Plastic
Compliances:
CE Marked
Lamp voltage - max:
120 VAC
Actuator:
Standard
Certifications:
UL Listed
Department:
Electrical
Product Color:
Red
Voltage Rating:
120V
Configuration:
Two-Position
Standards:
NEMA 3R
Listing:
UL Listed
Product Group:
Motor Control & Automation
Product Subgroup:
Selector Switches

Eaton 10250T597LRD2A-1X – Frequently Asked Questions

1) Will the Eaton 10250T597LRD2A-1X selector switch fit a standard 30.5 mm panel hole?
Yes. The 10250T597LRD2A-1X is a 30.5 mm heavy-duty operator, which is the standard large panel cutout used on industrial control stations. The illuminated head itself is a 40 mm unit, so allow clearance around the hole for the larger lens ring and for adjacent devices on the panel face.
2) Can this Eaton illuminated selector switch be mounted outdoors or in a washdown area?
It is rated NEMA 3, 3R, 4, 4X, 12 and 13, which covers outdoor rain and sleet, hosedown and corrosion-resistant 4X duty, and dust or oil-laden indoor environments. Typical use is food and beverage washdown lines, outdoor equipment enclosures and dusty plant floors. The seal is only as good as the enclosure it goes into, so the panel must carry a matching rating.
3) How many circuits can I wire to this two-position selector switch?
It carries a 1 NO-1 NC contact block, so you get one normally open and one normally closed circuit off the same two-position operator. That is enough to energize one load in position two while dropping another, or to run a single start circuit with an interlock. If your sequence needs two independent NO circuits, this contact arrangement will not do it.
4) What does 'Pull: maintained' mean on this Eaton selector switch?
The operator has to be pulled out before it will move between its two positions, and it stays where you put it once released. That pull-to-turn action is an anti-accidental-operation feature, common on machine stations where a bumped knob would change machine state. Maintained means it holds the selected position rather than springing back.
5) Does this Eaton switch come assembled, or do I have to build up the operator, contact block and light unit?
It ships assembled at the factory as a complete unit, operator, illuminated head and contact block together. You are not ordering separate pieces and stacking them yourself, which is the difference between this and buying a 10250T operator and blocks a la carte.
6) Is the Eaton 10250T597LRD2A-1X UL Listed and CE marked for a spec'd control panel?
Yes on both. The switch is UL Listed and CE Marked, which is what most industrial control panel specs and inspection sign-offs are looking for on operator devices. The NEMA 3, 3R, 4, 4X, 12, 13 rating covers the environmental side of the same spec sheet.
7) What is the exact part number to order this Eaton illuminated selector switch?
Order Eaton part 10250T597LRD2A-1X, from the 10250T heavy-duty 30.5 mm line. That number pins the whole build: two-position pull-maintained operator, red standard actuator, 1 NO-1 NC contacts and a 120 VAC full-voltage LED light unit. Changing the light voltage or contact arrangement means a different catalog number.
8) Is the actuator on this Eaton switch red, and does the lens light up red?
The actuator is the standard style finished in red, which is the usual choice for stop, off, or alarm-state functions on an operator station. Red gives fast recognition on a crowded panel, and the LED unit behind it illuminates the head so status is readable at a distance.
How fast can I get the Eaton 10250T597LRD2A-1X delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton 10250T597LRD2A-1X come with a warranty?
Absolutely. The Eaton 10250T597LRD2A-1X is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton 10250T597LRD2A-1X?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Eaton 10250T597LRD2A-1X from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!