You may also like
11/2 BLK MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 1.5
- Size 2:
- 1.5
- Size 3:
- 1.5
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Black
- Product Material:
- Malleable Iron
- Product Weight:
- 1.73 lbs
ASC Engineered Solutions 310030606 – Frequently Asked Questions
1) Are all three openings on this 1-1/2 inch black malleable iron tee the same size?
Yes, it's a straight (equal) tee. All three outlets are 1-1/2 inch female pipe thread, so there's no reducing branch. If you need to step the branch down, you'd add a bushing or use a reducing tee instead.
2) Is this black malleable iron tee approved for fire sprinkler piping?
It carries UL/FM approval, which is what an AHJ looks for on fire protection piping. Black malleable iron built to ASME B16.3 is the usual choice for wet sprinkler systems and dry standpipe runs.
3) Black or galvanized malleable iron tee for my job?
Black is the uncoated version and it's what goes in dry-service work: natural gas, fire sprinkler, steam, compressed air, and black steel water piping inside a building. Use galvanized where the line is open to moisture or carries potable water. This one is black finish malleable iron, so keep it out of wet exterior runs.
4) What material spec does this 1-1/2 inch tee meet for submittals?
The casting is ASTM A-197 malleable iron, with dimensions and pressure rating to ASME B16.3 and threads to ASME B1.20.1. Those three lines are usually all an engineer wants on the submittal for a threaded malleable fitting.
5) How heavy is a 1-1/2 inch black malleable iron tee for hanger and support loads?
Each fitting runs 1.73 lbs. Worth adding into the filled-pipe load when you're spacing hangers on a branch with several fittings clustered together.
6) What is the ASC Engineered Solutions part number for the 1-1/2 inch black malleable tee?
Order it as ASC Engineered Solutions 310030606, a 1-1/2 x 1-1/2 x 1-1/2 black malleable iron tee.
7) Do I need thread sealant with this malleable iron tee, or does it come sealed?
The tee ships as a bare casting with cut NPT threads, no sealant or tape applied. You supply pipe dope or PTFE tape rated for the service, gas-rated compound on fuel gas lines. Nipples and pipe are separate as well since all three ports are female.
How fast can I get the ASC Engineered Solutions 310030606 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 310030606 come with a warranty?
Absolutely. The ASC Engineered Solutions 310030606 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 310030606?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 310030606 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.