You may also like
#12--10 Wire Term Ring 10-Stud
Manufacturer Resources
Product Specs
- Department:
- Electrical
- Product Group:
- Wire Connectors & Terminals
- Product Subgroup:
- Lugs & Terminals
- Product Type:
- Ring Terminal
Metallics MWRC121010 – Frequently Asked Questions
1) What wire size does the Metallics MWRC121010 ring terminal accept?
The MWRC121010 is sized for #12 to #10 AWG wire. Strip and crimp a conductor in that range into the barrel; thinner wire (#14 or smaller) will not hold reliably in this barrel and a smaller-gauge terminal should be used instead.
2) What stud or screw size does the MWRC121010 ring terminal bolt to?
It is a 10-stud ring terminal, so the ring is drilled for a #10 screw or stud. If the terminal block, ground lug, or motor stud in front of you takes a 1/4-inch bolt, this ring will not seat on it.
3) Ring terminal or fork terminal for a #10 ground screw?
A ring terminal like the MWRC121010 has a closed ring, so the connection can't vibrate off the stud without the screw being fully backed out. A fork or spade terminal slides out sideways and is only worth using where you need to pull leads off a terminal strip often. For ground screws and motor studs, the closed ring is the one to use.
4) Do I need a special tool to install the Metallics MWRC121010?
It's a crimp-on terminal, not solder or set-screw, so you need a crimping tool that covers #12-10 AWG barrels. Pliers will not give a repeatable crimp. No hardware comes with the terminal, you use the existing #10 stud and nut or screw at the device.
How fast can I get the Metallics MWRC121010 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics MWRC121010 come with a warranty?
Absolutely. The Metallics MWRC121010 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics MWRC121010?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics MWRC121010 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.