Metallics JFW140 12 x 1-1/2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.31
$0.31
Metallics JFW140 12 x 1-1/2 in. Flat Head Slotted Wood Screws - Steel Zinc - 100qty

Metallics JFW140 12 x 1-1/2 in. Flat Head Slotted Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFW140
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.31
$0.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
12 x 1-1/2 in. Flat Head Slotted Wood Screws - Steel Zinc - 100qty

  • Features

    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Steel Zinc Material
    • Flat Head with Slotted Drive
    • 12 Diameter, 1-1/2" Length

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.132 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.389 - 0.438 in.
Fastener Length:
1/1/02
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.29 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Slot Depth:
0.039 - 0.06
Slot Width:
0.056 - 0.067
Sub Division:
Electrical-E H2
Thread Per Inch:
11
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFW
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFW140 – Frequently Asked Questions

1) Do I need to pre-drill for a #12 x 1-1/2 in. slotted wood screw?
It is a tapered point screw with 11 threads per inch, so it draws itself into softwood but has no self-drilling tip. In hardwood, oak trim, or near an edge, drill a pilot and countersink first to avoid splitting. Thread runs about two-thirds of the length on screws of this size.
2) How many Metallics JFW140 screws come in a jar, and can I buy just a few?
The JFW140 ships in a jar with a 100-count minimum order. It is not sold in handfuls, so plan on 100 pieces per order.
3) Are these #12 wood screws zinc plated enough for damp or exterior work?
The JFW140 is steel with a zinc finish. Zinc plating handles indoor and protected work and slows surface rust, but it is a plated carbon steel screw, not stainless or hot-dip galvanized, so for sustained exterior exposure or treated lumber contact a stainless or hot-dip fastener is the better call.
4) What size screwdriver or bit fits the Metallics JFW140 slot?
Slotted drive only, no Phillips or square recess. The slot measures 0.056 to 0.067 in. wide and 0.039 to 0.06 in. deep, so a flat blade tip in that thickness range with a blade width near the 0.389 to 0.438 in. head diameter will seat fully without camming out. Driving these with a power driver is tough; most installers do them by hand.
5) Do Metallics JFW140 screws meet Buy American or ARRA requirements on a public project?
The JFW140 is flagged Buy American compliant and ARRA compliant in the manufacturer data, with China given as the country of origin. On a federally funded job, submit those compliance flags with your material list and let the specifying authority confirm against the project's exact domestic-content clause.
6) What standard do these Metallics wood screws conform to?
Threads and head dimensions follow ASME B18.6.1-1997, the wood screw standard. That means the #12 diameter, 11 threads per inch, head height and head diameter are all to published dimensions, so the screw interchanges with any other B18.6.1 #12 x 1-1/2 in. flat head slotted screw on a submittal.
7) Why would an electrician stock slotted #12 wood screws instead of Phillips?
Slotted heads are still specified for a lot of electrical work: mounting boxes, straps, and devices to wood studs where existing hardware is slotted and the job calls for a match. The JFW140 is catalogued for electrical use, and the slotted drive lets one flat blade on a lineman's screwdriver handle both the device terminals and the mounting screws.
8) Can I get the Metallics JFW screws in other lengths or counts?
Yes. The JFW series covers other diameters, lengths, and pack quantities beyond the JFW140 #12 x 1-1/2 in. jar of 100, available by request.
9) How much does a jar of 100 JFW140 screws weigh for shipping or stocking?
A jar of 100 runs 1.29 lbs, with jar dimensions of 3 x 2.7 x 3 in. Light enough to keep several sizes on the truck without eating payload.
How fast can I get the Metallics JFW140 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFW140 come with a warranty?
Absolutely. The Metallics JFW140 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFW140?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFW140 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!