Metallics JFWP40 12 x 1-1/4 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.31
$0.31
Metallics JFWP40 12 x 1-1/4 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

Metallics JFWP40 12 x 1-1/4 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP40
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.31
$0.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
12 x 1-1/4 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Flat Head with Phillips Drive
    • 12 Diameter, 1-1/4" Length
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Country Of Origin:
MUL
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.132 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.389 - 0.438 in.
Fastener Length:
1/1/04
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.148 - 0.171
Phillips Recess Diameter:
0.270 - 0.283
Phillips Recess Width:
0.036
Product Family:
Electrical Supplies
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
0.96 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
11
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP40 – Frequently Asked Questions

1) What size driver bit do I need for the Metallics JFWP40 wood screws?
A #3 Phillips bit. The JFWP40 is a #12 screw with a Phillips recess measuring 0.270 to 0.283 inch in diameter and 0.148 to 0.171 inch deep, so a #2 bit will cam out and chew the recess under load. Keep a #3 in the driver.
2) Will a #12 x 1-1/4 in. flat head wood screw sit flush in a countersunk hole?
Yes, if the countersink matches the head. The JFWP40 has a flat head measuring 0.389 to 0.438 inch across and 0.132 inch high, so it seats flush in a standard 82 degree countersink of that diameter. In softwood the head will pull itself flush without a countersink; in hardwood, countersink first or you will split the surface fibers.
3) Are these zinc wood screws OK for outdoor or damp locations?
These are steel with a zinc finish, which is an indoor and protected dry-location coating. It will handle a garage, attic, or interior wall cavity fine, but for exterior use, treated lumber, or anywhere with regular moisture, go to a stainless or hot dip galvanized wood screw instead. Zinc plating over plain steel will bloom and rust in wet service.
4) Do these screws qualify for a Buy American or ARRA funded job?
No. The JFWP40 wood screws are not Buy American compliant and are not ARRA compliant, and the country of origin is listed as multiple. If you are on a federally funded project with domestic sourcing language, these will not satisfy it.
5) How do these Metallics wood screws ship, and what is the minimum order?
They come packaged in a jar of 100, and 100 is the order minimum. The jar weighs 0.96 lbs. Other sizes and quantities can be arranged by request.
6) Do the Metallics JFWP40 screws meet a recognized dimensional standard for spec work?
They are built to ASME B18.6.1, with threads to ASME B18.6.1-1997. That is the wood screw dimensional standard, so head diameter, head height, recess geometry and thread pitch fall inside published tolerances rather than being a house dimension.
7) What are #12 x 1-1/4 in. flat head wood screws normally used for on an electrical job?
Fastening into wood framing: mounting boxes, straps, panel backboards, device brackets, and hanging equipment off studs and joists. Metallics lists them for the electrical, plumbing, heating and air conditioning trades. The #12 diameter is a heavier gauge than the #8 and #10 screws that come loose in box hardware, so it is the one to reach for when the load matters. Note the tapered point means no self drilling, so pilot into hardwood.
How fast can I get the Metallics JFWP40 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP40 come with a warranty?
Absolutely. The Metallics JFWP40 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP40?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP40 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!