Metallics JFWP30 10 x 1-1/4 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.24
$0.24
Metallics JFWP30 10 x 1-1/4 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

Metallics JFWP30 10 x 1-1/4 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP30
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.24
$0.24
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1-1/4 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Flat Head with Phillips Drive
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Steel Zinc Material
    • 10 Diameter, 1-1/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.116 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.34 - 0.385 in.
Fastener Length:
1/1/04
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.123 - 0.146
Phillips Recess Diameter:
0.245 - 0.258
Phillips Recess Width:
0.034
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.72 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
13
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP30 – Frequently Asked Questions

1) How many screws come in a jar of Metallics JFWP30 wood screws?
The JFWP30 ships 100 screws to a jar, and 100 is the order minimum. If you need a different count or a different size in the same flat head Phillips wood screw line, other sizes and quantities are available by request.
2) What size Phillips bit drives a #10 x 1-1/4 in. Metallics wood screw?
Use a #3 Phillips. The recess on the JFWP30 runs 0.245 to 0.258 in. diameter and 0.123 to 0.146 in. deep, so a #2 bit will sit shallow in it and cam out when you drive into hardwood. Keep a fresh #3 in the driver if you are running a full jar.
3) Will a #10 flat head wood screw sit flush in a strap or bracket countersink?
Yes, provided the hole is countersunk. The head measures 0.34 to 0.385 in. across with a 0.116 in. head height, so a flat head seats flush in an 82-degree countersink of that diameter. In sheet metal straps or unformed holes the head will stand proud by that 0.116 in. and you will want a pan or truss head instead.
4) Can I use the JFWP30 on a federally funded project with Buy American requirements?
No. The JFWP30 is not Buy American compliant and is not ARRA compliant, and country of origin is listed as multiple. If your contract carries a domestic sourcing clause, this is not the screw to submit.
5) Do I need to pre-drill for these #10 wood screws?
The JFWP30 has a tapered point, not a self-drilling or type-17 auger point, so in hardwood, oak blocking or near the end of a board you should pilot it. In softwood framing and plywood it drives without a pilot. There is no drill flute at the tip to clear chips.
6) Are zinc plated wood screws OK for outdoor or damp locations?
Keep them dry. The JFWP30 is steel with a zinc finish, which handles indoor and concealed work fine but is not a marine or exterior-exposure coating. For wet locations, treated lumber or outdoor mounting, go to a stainless flat head wood screw of the same #10 x 1-1/4 in. size.
7) Do Metallics JFWP wood screws meet a dimensional standard for spec work?
Head, recess and thread dimensions are built to ASME B18.6.1, with the thread specifically to ASME B18.6.1-1997. That is the standard a submittal for wood screws is normally written against, so the head width, head height and 13 TPI values are all referenced dimensions rather than a house spec.
8) How heavy is a jar of 100 of these screws for shipping or stocking a van?
A jar of 100 runs 0.72 lbs. Jar footprint is listed at 3 in. by 3 in. with a 2.15 in. height, so it stacks in a standard van bin or parts drawer.
How fast can I get the Metallics JFWP30 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP30 come with a warranty?
Absolutely. The Metallics JFWP30 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP30?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP30 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!