Metallics JFWP12 6 x 1-1/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.17
$0.17
Metallics JFWP12 6 x 1-1/4 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

Metallics JFWP12 6 x 1-1/4 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP12
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.17
$0.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 1-1/4 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

  • Features

    • Flat Head with Phillips Drive
    • Steel Zinc Material
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • 6 Diameter, 1-1/4" Length

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.244 - 0.279 in.
Fastener Length:
1/1/04
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.083 - 0.106
Phillips Recess Diameter:
0.161 - 0.174
Phillips Recess Width:
0.029
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.43 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP12 – Frequently Asked Questions

1) Will a #6 x 1-1/4 flat head wood screw sit flush in a countersunk hole?
Yes, that is what the flat head is for. The JFWP12 head is 0.244 to 0.279 inch across with a head height of 0.083 inch, so an 82-degree countersink or a factory countersunk strap, plate, or box bracket will take it flush. Driven into bare wood without a countersink the head will stand proud.
2) Are Metallics JFWP12 wood screws Buy American or ARRA compliant for a government job?
No. The JFWP12 is not Buy American compliant and is not ARRA compliant, and country of origin is listed as multiple. If your contract carries a domestic sourcing clause, these will not qualify.
3) What driver bit do I need for the Metallics JFWP12 wood screws?
A #2 Phillips bit. The JFWP12 has a Phillips recess measuring 0.161 to 0.174 inch in diameter, 0.029 inch wide, and 0.083 to 0.106 inch deep, which is standard #2 territory. Using a #1 will cam out and chew the recess.
4) Are these Metallics wood screws OK for outdoor or damp locations?
These are zinc plated steel. Zinc handles dry interior work and incidental moisture fine, but it is not a stainless or hot dip coating, so for sustained exterior exposure, pressure treated lumber, or wet locations you want a stainless or hot dip galvanized screw instead.
5) Do I need to pre-drill for a #6 x 1-1/4 inch tapered point wood screw?
The JFWP12 has a tapered point and 18 threads per inch, so it draws itself into softwood studs and plywood without a pilot. In hardwood, or closer than an inch or so to an end or edge where splitting is a risk, drill a pilot. The thread runs about two thirds of the length on screws of this size.
6) How are the Metallics JFWP12 screws packaged and what is the minimum order?
They ship in a jar of 100, and 100 is the minimum order quantity. The filled jar weighs 0.43 lbs. Other sizes and quantities in the JFWP line can be requested.
How fast can I get the Metallics JFWP12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP12 come with a warranty?
Absolutely. The Metallics JFWP12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!