Metallics JFWP11 6 x 1 in. Fla...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.17
$0.17
Metallics JFWP11 6 x 1 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

Metallics JFWP11 6 x 1 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP11
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.17
$0.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 1 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Flat Head with Phillips Drive
    • Steel Zinc Material
    • 6 Diameter, 1" Length
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.244 - 0.279 in.
Fastener Length:
1
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.083 - 0.106
Phillips Recess Diameter:
0.161 - 0.174
Phillips Recess Width:
0.029
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.35 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP11 – Frequently Asked Questions

1) What driver bit do I need for the Metallics JFWP11 wood screws?
A #2 Phillips bit. The JFWP11 is a Phillips drive screw with a recess diameter of 0.161 to 0.174 in. and a recess depth of 0.083 to 0.106 in., so a #2 tip seats fully without camming out. A #1 will spin in the recess and a #3 won't bottom.
2) How many screws come in a jar of Metallics JFWP11, and can I buy fewer?
The JFWP11 ships as a jar of 100, and the jar is the order minimum, so 100 pieces is the smallest quantity. Metallics lists other sizes and quantities of this flat head Phillips wood screw by request.
3) Will a #6 x 1 in. flat head wood screw sit flush in a countersunk hole?
Yes, that's what the flat head is for. The JFWP11 head measures 0.244 to 0.279 in. across with a head height of 0.083 in., so a standard 82-degree countersink for a #6 screw lets it finish flush with the surface. Pair it with a tapered pilot, since the screw has a tapered point.
4) Are Metallics JFWP11 screws Buy American or ARRA compliant for a government job?
No on both counts. The JFWP11 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your project carries a domestic sourcing requirement, this screw won't satisfy it.
5) How much of the Metallics JFWP11 screw is threaded?
At a 1 inch length, roughly two thirds of the shank is threaded, at 18 threads per inch. Where a nominal length is too short to carry the minimum thread length, the threads run as close to the underside of the head as practicable. Figure on about 2/3 inch of thread engagement into your substrate.
6) Are zinc plated steel wood screws OK for outdoor or wet locations?
The JFWP11 is steel with a zinc finish, which is a plating meant for dry interior service. Zinc plate gives light corrosion resistance only, so for exterior walls, damp crawl spaces, or anywhere near treated lumber, step up to a stainless or hot dip galvanized flat head wood screw instead.
7) Do these Metallics wood screws meet ASME B18.6.1?
Yes. The JFWP11 is built to ASME B18.6.1 for dimensions and to ASME B18.6.1-1997 for the thread, which is why the head and recess dimensions fall in standard ranges and a stock #6 countersink and #2 bit both fit it.
8) How much does a jar of these #6 x 1 in. wood screws weigh and how big is the container?
The jar comes in at 0.35 lbs, measuring 3 x 3 x 2.15 in. Small enough to drop in a pouch or a van bin rather than carry a box of loose fasteners.
How fast can I get the Metallics JFWP11 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP11 come with a warranty?
Absolutely. The Metallics JFWP11 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP11?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP11 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!