Metallics JFWP14 6 x 2 in. Fla...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.30
$0.30
Metallics JFWP14 6 x 2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

Metallics JFWP14 6 x 2 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP14
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.30
$0.30
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6 x 2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

  • Features

    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Flat Head with Phillips Drive
    • Steel Zinc Material
    • 6 Diameter, 2" Length

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.244 - 0.279 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.083 - 0.106
Phillips Recess Diameter:
0.161 - 0.174
Phillips Recess Width:
0.029
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
0.636 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP14 – Frequently Asked Questions

1) Will a #6 flat head wood screw sit flush in a countersunk hole or do I need to counterbore?
The JFWP14 head is 0.244 to 0.279 inch across and 0.083 inch high, with a flat head profile meant to sit flush in a countersink or in the countersunk holes already punched in straps, hangers, and device plates. In bare wood with no countersink the head will stand slightly proud, so pre-countersink if you need it dead flush.
2) Are these zinc wood screws OK for outdoor or damp locations?
These are steel with a zinc finish, which is a dry indoor and protected coating. Fine for framing bays, basements, mechanical rooms, and interior trim work. For exterior siding, decks, or anything exposed to weather or treated lumber, go with a stainless or hot dip galvanized wood screw instead, since plain zinc plating will corrode in those conditions.
3) Can I use these screws on a Buy American or ARRA funded project?
No. The JFWP14 is not Buy American compliant and is not ARRA compliant, and the country of origin is listed as multiple. For federally funded work carrying domestic sourcing requirements you will need a domestically produced wood screw instead.
4) What size screwdriver or bit do I need for the Metallics JFWP14 wood screws?
A #2 Phillips bit drives the JFWP14. The recess is 0.161 to 0.174 inch in diameter, 0.083 to 0.106 inch deep, with a 0.029 inch recess width, so a #2 seats fully and a #1 will cam out on a 2 inch screw.
5) How are the Metallics JFWP14 screws packaged and what is the minimum I can buy?
The JFWP14 ships in a jar of 100, and 100 is the order minimum. Jar weight is 0.636 lbs. Metallics notes other sizes and quantities are available by request if you need a different length or a bulk count.
6) Do these wood screws meet a recognized dimensional standard for a spec submittal?
Yes. The JFWP14 is built to ASME B18.6.1, with thread dimensions to ASME B18.6.1-1997. That is the standard governing head dimensions, recess geometry, and thread form for wood screws, so the head and recess figures can be submitted as-is against a drawing calling out B18.6.1.
7) Do I need to pre-drill for a #6 x 2 inch tapered point wood screw?
The JFWP14 has a tapered point, which is a traditional wood screw point rather than a self drilling type point. In softwood framing it will usually start without a pilot, but in hardwood, trim, or close to an edge, pre-drill a pilot to avoid splitting and to keep the #2 Phillips recess from camming out under torque.
How fast can I get the Metallics JFWP14 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP14 come with a warranty?
Absolutely. The Metallics JFWP14 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP14?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP14 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!