Metallics FWP22M 8 x 2 in. Fla...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.26
$0.26
Metallics FWP22M 8 x 2 in. Flat Head Phillips Wood Screws - Steel Zinc - 1000qty

Metallics FWP22M 8 x 2 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: FWP22M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.26
$0.26
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 2 in. Flat Head Phillips Wood Screws - Steel Zinc - 1000qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Flat Head with Phillips Drive
    • Steel Zinc Material
    • 8 Diameter, 2" Length
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.

Manufacturer Resources

Product Specs

Minimum Purchase:
1000 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.100 - 0.100 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.292 - 0.332 in.
Fastener Length:
2
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
1000
Order Minimum Uom Imperial:
TH
Pack Type:
Box
Phillips Recess Depth:
0.113 - 0.136
Phillips Recess Diameter:
0.191 - 0.204
Phillips Recess Width:
0.032
Product Group:
Fasteners
Product Height:
6 in
Product Length:
7.25 in
Product Weight:
8.45 lbs
Product Width:
6.25 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
15
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics FWP22M – Frequently Asked Questions

1) How many Metallics FWP22M wood screws come in a box?
The FWP22M ships as a box of 1,000 screws, and 1,000 is also the order minimum, so it is sold by the full box rather than by the piece. Figure roughly 8.45 lbs for the box.
2) Will a #8 x 2 in. flat head screw sit flush in a countersunk hole?
Yes, if the hole is countersunk. The flat head measures 0.292 to 0.332 in. across with a 0.100 in. head height, so it needs a matching countersink or a fixture with a chamfered hole to pull flush. In bare wood with no countersink the head will stand proud or crush the surface fibers.
3) Do these screws meet Buy American requirements on a federal job?
The FWP22M is listed as both Buy American compliant and ARRA compliant, which is what a government or institutional spec usually asks for on fasteners. Country of origin is recorded as multiple.
4) What size Phillips bit do I need for these #8 x 2 in. wood screws?
A #2 Phillips bit. The recess runs 0.191 to 0.204 in. diameter and 0.113 to 0.136 in. deep, which is standard #2 Phillips geometry, so one bit covers the whole box.
5) Are these zinc wood screws OK for outdoor or damp locations?
These are steel with a zinc finish, which is a dry-location corrosion coating. Use them for interior framing, blocking, box and strap mounting to wood studs. For exterior, treated lumber, or wet areas, step up to stainless or a coated exterior-rated screw instead.
6) What standard do these Metallics wood screws conform to?
Dimensions and threads both follow ASME B18.6.1 (thread standard cited as ASME B18.6.1-1997), so head, recess, and thread dimensions interchange with any other B18.6.1 #8 flat head wood screw. That matters if a submittal calls out the standard rather than a part number.
7) Is a tapered point wood screw the right choice, or should I use a self-drilling screw?
Tapered point is for wood substrates: it displaces fiber as it drives and the taper plus the coarse 15 TPI thread gives withdrawal strength in lumber. If you are fastening into sheet metal studs, strut, or enclosure steel, a tapered wood point is the wrong fastener, use a self-drilling or sheet metal screw. For hardwood, pre-drill to avoid splitting.
8) Can I get this Metallics flat head wood screw in another length or diameter?
The FWP22M itself is fixed at #8 diameter by 2 in. long. Other diameters, lengths, and pack quantities in the same JFWP flat head Phillips wood screw family are available on request.
How fast can I get the Metallics FWP22M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics FWP22M come with a warranty?
Absolutely. The Metallics FWP22M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics FWP22M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics FWP22M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!