Metallics JFWP17 8 x 1/2 in. F...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.16
$0.16
Metallics JFWP17 8 x 1/2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

Metallics JFWP17 8 x 1/2 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP17
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.16
$0.16
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1/2 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • Flat Head with Phillips Drive
    • 8 Diameter, 1/2" Length
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.100 - 0.100 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.292 - 0.332 in.
Fastener Length:
2-Jan
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.113 - 0.136
Phillips Recess Diameter:
0.191 - 0.204
Phillips Recess Width:
0.032
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.31 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
15
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP17 – Frequently Asked Questions

1) Will a #8 x 1/2 inch flat head wood screw sit flush in a countersunk hole?
Yes, if the hole is countersunk. The JFWP17 has a flat head measuring 0.292 to 0.332 inch across with a 0.100 inch head height, so it seats flush in a matching countersink. On a flat, un-countersunk surface the head will stand proud by that 0.100 inch. Hardware with factory countersunk screw holes (strike plates, hinge leaves, cover plates) takes it flush.
2) Is a 1/2 inch wood screw long enough to hold into a wood door or jamb?
At 1/2 inch overall length, the JFWP17 is a thin-material screw. It is meant for mounting plates, straps, clips and trim to wood where you only have about 1/2 inch of bite, and because it is too short to carry the minimum thread length the threads run as close to the underside of the head as practical, so nearly the whole shank grips. For anything structural or security related in a jamb, step up to a longer screw.
3) Do these screws meet a recognized dimensional standard for government or institutional specs?
Yes. The JFWP17 is built to ASME B18.6.1 for dimensions, with threads to ASME B18.6.1-1997. It is also flagged ARRA compliant and Buy American compliant, with country of origin listed as multiple. That combination is what most public-agency and institutional submittals ask for on a fastener line item.
4) What driver bit do I need for the Metallics JFWP17 wood screws?
A #2 Phillips bit. The JFWP17 is a Phillips drive screw, and the recess runs 0.191 to 0.204 inch diameter with a 0.113 to 0.136 inch depth, which is standard #2 territory. Using a #1 will cam out and chew the recess.
5) Does the Metallics JFWP17 need a pilot hole?
It has a tapered point with 15 threads per inch, so it will start in softwood without one. In hardwood, oak trim or near an edge, drill a pilot to avoid splitting. The tapered point is a wood-screw gimlet style point, not a self-drilling point for metal.
6) Are zinc plated steel wood screws okay for outdoor or damp locations?
The JFWP17 is zinc plated steel, which is a coating for indoor and dry-location corrosion resistance. For exterior trim, wet rooms, coastal work or pressure treated lumber, specify stainless rather than zinc plated steel.
7) Can I use the JFWP17 wood screw to fasten into metal studs or sheet metal?
No. It is a wood screw with a tapered point and 15 TPI coarse wood thread, so it is intended for wood and wood-composite substrates. For steel studs or sheet metal, use a self-drilling or sheet metal screw instead.
8) How do the Metallics JFWP17 wood screws come packaged and what is the minimum order?
They ship in a jar, with a minimum order of 100 count. Listed weight for the jar is 0.31 lbs. Other sizes and quantities are available by request.
How fast can I get the Metallics JFWP17 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP17 come with a warranty?
Absolutely. The Metallics JFWP17 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP17?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP17 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!